project "fade to black"
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
project "fade to black"
94 XJ, 4L 2wd 221000kms on it, little rust but not bad
pulled the rear carpet to see how bad the floor was
pulled the rear carpet to see how bad the floor was
Last edited by mynameismud; 04-26-2012 at 03:34 PM.
#2
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
new rad, tstat, upper hose and water pump.
guy at napa gave me a pump for a ZJ, so i took the night to clean up the bay and brackets a bit.
oh and i bought these for my last xj when i was making long arms and sold the jeep before i finished making the long arms, this ones getting arms for sure
guy at napa gave me a pump for a ZJ, so i took the night to clean up the bay and brackets a bit.
oh and i bought these for my last xj when i was making long arms and sold the jeep before i finished making the long arms, this ones getting arms for sure
Last edited by mynameismud; 04-26-2012 at 03:36 PM.
#3
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
tried to pull a transport that was spinning his tires on ice with my 2wd jeep... didnt work. chain kept coming off my ..(caugh caugh) bumper. put some wood under his tires and he got out.
#4
lol, I was kinda hoping you would rip your bumper off sorry
anyways how are those arms coming along?
anyways how are those arms coming along?
#6
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
i was hoping id rip the bumper off to, it'd be and excuse to make a real bumper lol and the arms are coming along slowly, theres other things on the list first.
those are Qa1 adventure series rock joints, i know there not the norm but they were alot cheaper then jonny joints would have been. i paid 350 canadian for all 4 with the bungs with tax and shipping. its so hard to get parts (for cheap) in canada. everythings 3 times the price it'd be in the states.
those are Qa1 adventure series rock joints, i know there not the norm but they were alot cheaper then jonny joints would have been. i paid 350 canadian for all 4 with the bungs with tax and shipping. its so hard to get parts (for cheap) in canada. everythings 3 times the price it'd be in the states.
Last edited by mynameismud; 04-26-2012 at 03:38 PM.
Trending Topics
#8
is the 2000 xj an auto as well?
if so they should share the same input, from what I have been reading they changed the input spline in 1990 but that is only what I read on the internet so cant guarantee anything
if so they should share the same input, from what I have been reading they changed the input spline in 1990 but that is only what I read on the internet so cant guarantee anything
#9
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
yes, sorry it is auto. i couldnt find an straight anwser when i searched so i figure i'd just ask. i also read i couldnt use the trans, i couldnt find a reason as to why though, i assume because itd be computer controlled? OBD2?
#10
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
picked up the donor jeep saturday afternoon. im taking the trans, tcase, front diff, drive shafts, seats, speakers and a few other things. i sold the engine, the rear, gas tank and a few other things and with what ill get for scrap on the jeep ill end up making a few bucks
#13
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
got the thirty all back together. boxed the lower control arm mounts and gusset's on the upper part of the C's
tore into the case
tore into the case
#14
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
8 Ball shift ****. I still have to make a proper button for it. I looked like scarface after drilling it out..