Project "Eliminator"
#16
Senior Member
Join Date: Aug 2008
Location: tan house white shutters key's under the flower pot
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
i just saw that on comanche club, i posted on your thread, that is a darn nice truck. i'm looking at a big ton comanche, but no one is really giving me any info on there.
#17
aka Wade-O
Thread Starter
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
thanks.
If i found a big ton comanche and it was in fairly decent shape, i'd probably pick it up. what year is it?
(ps: was your avatar taken at the Badlands?)
If i found a big ton comanche and it was in fairly decent shape, i'd probably pick it up. what year is it?
(ps: was your avatar taken at the Badlands?)
#18
Senior Member
Join Date: Aug 2008
Location: tan house white shutters key's under the flower pot
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
the comanche is a 90 in decent shape, not much rust. 122k. good list of new parts to, left side cab corner and slight rocker rust. but the door jams and stuff are rust free from the pics. i can get it for under a grand. i'm thinkin i should jump on it, what do you think?
#20
aka Wade-O
Thread Starter
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
got a nice little package today.
4 johnny joints with jam nuts and tube adapters. also got 4 universal control arm mounts.
project 4-link, here i come!
4 johnny joints with jam nuts and tube adapters. also got 4 universal control arm mounts.
project 4-link, here i come!
#26
aka Wade-O
Thread Starter
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
gettin tubing and plate tomorrow. cut holes in floor to access top of frame rail. gonna plate the inside and outside for the crossmember and long arm mounts.
#30
aka Wade-O
Thread Starter
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
progress.
cut holes in floor. gonna plate the inside and outside of the frame.
cut off lower control arm mounts
quick pic of what lower arm is gonna look like. got all 4 cut to length.
cut holes in floor. gonna plate the inside and outside of the frame.
cut off lower control arm mounts
quick pic of what lower arm is gonna look like. got all 4 cut to length.