I undid both side completely and then lowered my low profile jack all the way to the floor. still had to push down on the side I was working on to get it out but I came out. Your other option is to take out the upper control arms, that will let the axle drop some more. May be harder to raise it back up evenly though.
|
Originally Posted by kylemason
(Post 3291632)
I undid both side completely and then lowered my low profile jack all the way to the floor. still had to push down on the side I was working on to get it out but I came out. Your other option is to take out the upper control arms, that will let the axle drop some more. May be harder to raise it back up evenly though.
|
https://cimg4.ibsrv.net/gimg/www.che...9e18bcc2c1.jpg
Rusty and I got the spring out with the spring compressor and an air gun https://cimg6.ibsrv.net/gimg/www.che...38d3b0c002.jpg I took the old headlight out but if anyone is wondering, the purple goes on top, red on right, black on left https://cimg1.ibsrv.net/gimg/www.che...0460dffec1.jpg New headlights! https://cimg2.ibsrv.net/gimg/www.che...ce85909a4a.jpg Got it wired in but need 4 longer screws that ill get tomorrow to put the mount back in. |
Also I just bought all 4 turn signals off of Rere1992 to replace all of my beat up ones. Im also getting the inside door handle from him!! Excited that I found the signals, I've had trouble locating them in the OEM yellow
|
This morning, before work me and rusty got the passenger side spring put in and almost have the drivers side in. Tried to go to fastenal to get those screws for the headlights but they were moving locations so they were closed. Ill go to the new location tomorrow!!:cheers:
|
Just ordered Detours backbone winch bumper and light bar setup! Im excited, the guy was super nice and said it will be shipped in 15 days!
|
https://cimg6.ibsrv.net/gimg/www.che...2394f375f3.jpg
Drove 2hrs away this morning to pick these up!! Super clean! Been looking through the JY for a long time with no luck... Finally found them on craigslist in Wooster Ohio.. $75 bucks, I think I got a steal considering the condition!! I got both fronts, I didn't buy the back seats because mine are in good condition |
Still in the process of finishing the front drivers side spring. Slow but steady progress :lol: will probably finish wednesday!
|
Been awhile since last update but shes coming along! Got the front springs fully in!! Finally... :lol: Then I went to take it to the garage I rent a few miles down... Then problems. A stud broke off and was locking the passenger side wheel doing down the road.. I'm assuming after limping it like this for .05 miles it now needs a new hub, bearing, possibly some brake parts... Having trubble getting the ZJ seats to work right too but oh well im having fun on my slow build. its getting there slowly.
|
Originally Posted by offroadXJ1999
(Post 3297351)
I'm assuming after limping it like this for .05 miles it now needs a new hub, bearing, possibly some brake parts...
|
Originally Posted by kylemason
(Post 3297703)
I just bought all of these parts on eBay - Rotors, pads, full hub assembly: $140 shipped. Video Link: http://www.ebay.com/itm/191839188138?_trksid=p2057872.m2749.l2649&ssPageNa me=STRK%3AMEBIDX%3AIT |
Did some work on the xj today!! Finally got the high output alternater installed!! Plus me and rusty got the old battery out and some of the new battery wires in! Everything went pretty smooth besides me chipping a little peice off of the sidewall of the pully trying to hit it softly to allow tne belt to loosen enough for rusty underneath to put the belt back on the alty. i dont think think the little chip will effect anything but it still grinds my gears haha.. also i got a RC adjustable trac bar and I ordered a Skyjacker steering stabilizer to replace my beat up stock one.. oh and I got some more lug nuts to replace the keyed ones from PO that are a PIA!! Thats where Im at now, I think its going pretty steady! Getting excited!
|
Got the best deal of my whole life today... meet a guy off Craigslist selling parts off his totaled xj. Went to his house tonight and scored major deal!! I got a or-fab rear quarter armor with rubrail and taillight guard for both sides. I also got a pair of rock rails (unknown brand but looks very heavy duty). Lastly I got 4 spidertrax wheel spacers. All of this for the large price of.... $180!!! All of the parts are in amazing condition! Plus I was going to buy all of these parts anyways so I saved a ton of money! Im pumped! Pics will be up tomorrow or Thursday!
|
All times are GMT -5. The time now is 07:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands