Project Cleanix
#1
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Project Cleanix
Hey guys, I just picked up this little gem from 1990 this morning. I'm calling it the 'Cleanix' because it's such a clean renix, especially for MN. I'm on my iPhone right now, so I will get on my puter later and caption these photos.
The interior is exactly like my 89's except for the headrests
I don't think there's ever been a dog back here
These seats are so damn comfy!
It's really clean back here too. And notice the gear shade that will be covering my sub
This is the most rust I've found
The clearcoat's even intact
I love the white and blue pinstripes. Merica!
The PO installed this plug under the seat. It might see some use
I like this radio so far
Low mileage
OVERHEAD CONSOLE!!!
NP242
Nice and clean under here
I guess you could call this upgraded
The interior is exactly like my 89's except for the headrests
I don't think there's ever been a dog back here
These seats are so damn comfy!
It's really clean back here too. And notice the gear shade that will be covering my sub
This is the most rust I've found
The clearcoat's even intact
I love the white and blue pinstripes. Merica!
The PO installed this plug under the seat. It might see some use
I like this radio so far
Low mileage
OVERHEAD CONSOLE!!!
NP242
Nice and clean under here
I guess you could call this upgraded
Last edited by austinjoe13; 07-07-2013 at 09:27 PM.
#3
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Yes it is! I found some rust above the exhaust tip that is close to going through, then both rear quarters have a little poking through.
#7
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Well my gauge lights are no shows I pulled the headlight switch from the Cadillac (build here: https://www.cherokeeforum.com/f46/cadillac-117891/ ) The fuse still blows, I have to find the short now
Trending Topics
#8
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Ok, so I pulled the cluster expecting to find melted wires. There was no such thing thank God! Turns out the reason my gauge lights were out was because the PO wired the HU with the dimmer wired up to the radio's ground. Idk about people these days
Perfect!!
OH! And my jeep sounds turbo'd. Kinda cool
Perfect!!
OH! And my jeep sounds turbo'd. Kinda cool
Last edited by austinjoe13; 07-08-2013 at 11:25 PM.
#9
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
I haven't really outlined any goals for this build yet. It has brand new 225/70r15 Cooper AT3s so for now it's staying stock as far as suspension goes. After those wear out we'll see!
I have a 10" Kicker CVR sitting in my living room right now. I wired up the RCA and remote wires to the HU last night and hopefully my buddy will be bringing his 1200w amp in for me today It'll be tuned way down though...
I have a 10" Kicker CVR sitting in my living room right now. I wired up the RCA and remote wires to the HU last night and hopefully my buddy will be bringing his 1200w amp in for me today It'll be tuned way down though...