Project Cheap Xj
#32
Member
Thread Starter
Join Date: Jan 2016
Location: Elk River, MN
Posts: 245
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
But on a brighter note, the brakes all the way around have a ton of life left (i cleaned and adjusted the rears), and the front end is surprisingly tight! Oh and my rear upper shock bolts just spin..... So im not sure what the hell im going to do about those. Maybe ill just cut a hole in the floor and take the easy route.
Heres the part that makes me sad
And this........... So ugly.. Hopefully it wont look so gross with new springs and shocks.
Heres the part that makes me sad
And this........... So ugly.. Hopefully it wont look so gross with new springs and shocks.
#35
Member
Thread Starter
Join Date: Jan 2016
Location: Elk River, MN
Posts: 245
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I took her on her maiden voyage after the lift tonight. I don't have any vibrations or anything like that, but I did notice an occasional growling noise, almost like a bad wheel bearing that seemed to be coming from the rear/middle. I'll have to inspect that further this weekend. Maybe I need to do the t-case drop? Who knows....
I also replaced a bunch of AC o-rings and charged it back up. I'll find out if it's holding or not when I take it hunting this weekend.
So far so good though. I put about 20 miles on, and I'm at 34 in the front, and like 33 3/4 in the rear, and it no longer nose dives every time I hit the brakes lol.
I also replaced a bunch of AC o-rings and charged it back up. I'll find out if it's holding or not when I take it hunting this weekend.
So far so good though. I put about 20 miles on, and I'm at 34 in the front, and like 33 3/4 in the rear, and it no longer nose dives every time I hit the brakes lol.
#37
Member
Thread Starter
Join Date: Jan 2016
Location: Elk River, MN
Posts: 245
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I think I fixed a major leak today. I was checking the trans pan since it was leaking all over the place. I checked the bolts, and they were ALL at least 3/4 turns loose! Half if them wouldn't even get my ratchet to click when I spun it, they were that loose.
So I snugged them down on the cork gasket, and cleaned off the trans fluid that was coating the entire underside. Hopefully that does the trick! It's got some other leaks, but that was by far the worst.
Here's a before picture where you can see how bad it was leaking and blowing all over everything.
So I snugged them down on the cork gasket, and cleaned off the trans fluid that was coating the entire underside. Hopefully that does the trick! It's got some other leaks, but that was by far the worst.
Here's a before picture where you can see how bad it was leaking and blowing all over everything.
#41
Member
Thread Starter
Join Date: Jan 2016
Location: Elk River, MN
Posts: 245
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I took Betty on our first family outing this morning. She did really well, and I'm finally comfortable enough with it to haul the little man around, and I'm pretty surprised with how well the car seat fits!
I'll be driving it for the next few days with the 8-10" we are expecting. It will be tested this week for sure!
I also scored some tow hooks off my brother in laws Silverado, since he had to remove them to mount the plow. I'll have to figure out how to mount them somehow.
I'll be driving it for the next few days with the 8-10" we are expecting. It will be tested this week for sure!
I also scored some tow hooks off my brother in laws Silverado, since he had to remove them to mount the plow. I'll have to figure out how to mount them somehow.
#43
Member
Thread Starter
Join Date: Jan 2016
Location: Elk River, MN
Posts: 245
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Well i got to test out the 4WD this morning, it works great even though the light on the dash doesnt come on.
I did figure out that this thing doesnt have ABS, which kind of sucks. Ill have to get used to that, but i cant argue for what ive got into this thing.
It even stayed clean on my 2.5 hour drive into the office this morning
I did figure out that this thing doesnt have ABS, which kind of sucks. Ill have to get used to that, but i cant argue for what ive got into this thing.
It even stayed clean on my 2.5 hour drive into the office this morning