Project: Cheap *** Ride (budget build)
Thread Starter
Senior Member
Joined: Sep 2010
Posts: 607
Likes: 0
From: West Fargo, ND
Year: 1988
Model: Cherokee
Engine: 4.0l renix
thanks. I worked on a jeep the other day, i thought it was yours, but i noticed it was too dirty, yours should have new engine parts am i right? (xjchase)
Yeah it will be a completely different engine if I ever get my head back. I couldn't see myself bringing it to someone to get fixed.
Did you ever figure out what was wrong with your?
Did you ever figure out what was wrong with your?
Thread Starter
Senior Member
Joined: Sep 2010
Posts: 607
Likes: 0
From: West Fargo, ND
Year: 1988
Model: Cherokee
Engine: 4.0l renix
no, it has something to do with the cold. So, I'm assuming it's a bad sensor. I just haven't had the money or motivation to go poking around. I'm gonna replace the o2 sensor for sure, maybe go get another tps, mine has kind of a delay. and maybe a brakebooster to fix that goddamn vacuum leak.
Thread Starter
Senior Member
Joined: Sep 2010
Posts: 607
Likes: 0
From: West Fargo, ND
Year: 1988
Model: Cherokee
Engine: 4.0l renix
Don't be! It's not as easy as it looks. It's actually a *****! lol. I had no idea what i was getting myself into. But I'm glad. It's a good learning experience.
Member
Joined: Jan 2012
Posts: 113
Likes: 0
From: Leavenworth, Kansas
Year: 1989
Model: Cherokee
Engine: 4.0
I just installed those Mustang 5.0 injectors, i had some problems becuase i had some of the injector plugs wrong, so i had a gnarly misfire. But i rectified that, and it runs like a champ, i got better gas mileage and much much much better throttle response. i recommend the swap.
by the way diggn the wood grain
Thread Starter
Senior Member
Joined: Sep 2010
Posts: 607
Likes: 0
From: West Fargo, ND
Year: 1988
Model: Cherokee
Engine: 4.0l renix
thanks! =D And yeah, it kinda does, if they're orange, then they're 19lb which would be for renix.. if they're blue and black, then those would be for the H.O. motors.
Thread Starter
Senior Member
Joined: Sep 2010
Posts: 607
Likes: 0
From: West Fargo, ND
Year: 1988
Model: Cherokee
Engine: 4.0l renix
well, day 3 on the regear process... All is going well, got the front out and apart, and on the reinstall on the rear, I found out that i have to shave the spider gear shaft.. great.. thanks for telling me rusty's..


