WOW! Thats a record. Sweet platform thought! have fun with the build. Subd!
|
Thanks. Just incase im gonna take the head off of it and clean the block out, install new valve seals and put a whole new Felpro gasket set in it
|
Finally got a day off so going to redo my headliner in ACU camo.
|
Well due to unusable backing, I just ordered a complete headliner from SMS.
|
Just got all my engine parts back from machine shop and assembled. .040 bore, new pistons, port n polished head, .020 shaved off head. Three angle valve job as well. Neighbors think I have a V6 swap in it. Lolhttp://tapatalk.imageshack.com/v2/14...8bff9773c6.jpg
Also picked up a spare transmissionhttp://tapatalk.imageshack.com/v2/14...c51e1ddf4f.jpg |
Originally Posted by Outlaw Star
(Post 2957341)
Just got all my engine parts back from machine shop and assembled. .040 bore, new pistons, port n polished head, .020 shaved off head. Three angle valve job as well. Neighbors think I have a V6 swap in it. Lol
Also picked up a spare transmission |
About time you update :)
|
Originally Posted by bubbarules1958
(Post 2957946)
About time you update :)
|
Originally Posted by Outlaw Star
(Post 2958076)
Just been busy without a lot of time to work on it. [emoji17]
I wish I was that fast at doing stuff on my truck...when I set up I'm already half an hour in then start working on the truck... |
Originally Posted by 88whitecomanche
(Post 2958103)
But you make do when you do got time...
I wish I was that fast at doing stuff on my truck...when I set up I'm already half an hour in then start working on the truck... |
Now to track down two electrical gremlins. 1) Why my HVAC & Blower are not working and 2) Why my windshield wipers don't work.
|
:facepalm: lmao. Yes boys n girls the dreaded manifold crack can even happen to 4cys as well. Was letting the motor idle some more to break in when I heard a metal pop sound followed by the sound of exhaust leak. Yup, she cracked right between cyl 2&3 at the collector. Just gonna take her off and weld her up tomorrow untill I can get a chance to pick up my header and muffler.
|
1 Attachment(s)
Little progress. First off, my blower motor and windshield wipers weren't working due to bad switches. Good thing I still got my Xj to rob parts from.
Second thing I got a chance to get a new muffler. Went with a stainless Magnaflow unit. Sounds good. Not loud and not whisper quiet either. Third, got my manifold welded back up. |
Now I gotta tear the engine apart again. Getting a clacking from the bottom, up front...
|
Alright, little update. Screw the 4 banger, I've now got a Chevy 350 to drop in. (Quote Tim Allen "More Power!") Advance Adapters makes a bell housing kit to bolt to my AX-15 and a set of motor mounts. With Jeep Beach 2015 around the corner I'm hoping to have it in, tuned and lift installed.
|
All times are GMT -5. The time now is 11:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands