PBR Inspired XJ
Member
Joined: Oct 2014
Posts: 160
Likes: 5
From: East Bay, CA
Year: 2000
Model: Cherokee (XJ)
Engine: 4.7L Stroker
Ask and you shall receive!
For a while there, my old Snapple iCell 4 wouldn't let me post to this thread, but I guess the problem has been remedied.
We've been laying low, getting some stuff done for you guys to see. Making the budget work ain't easy.
You guys would know that all to well. .
For a while there, my old Snapple iCell 4 wouldn't let me post to this thread, but I guess the problem has been remedied.
We've been laying low, getting some stuff done for you guys to see. Making the budget work ain't easy.
You guys would know that all to well. .
Senior Member
Joined: May 2010
Posts: 544
Likes: 252
From: Newmarket, Ontario
Year: 1989
Model: Cherokee (XJ)
Engine: 4.0 L
Great video ... as always! I've used POR15 for years and like the results. It can be a pain in the butt to use though. It goes on just fine but you have to be careful handling it. As you point out ... gloves for sure and don't just hammer the lid back on because it will never come off again. It goes along way which is good. It's available in smaller cans but I buy small preservatives jars from the dollar store and pour the POR into them. Fill them up because it's the air in the container that causes it to harden ... and it will all on its own. I put the jars in my garage fridge and they last forever. Only down side of course is that there's less room for beer. Sorry, no PBR here but based on the fun you guys seem to be having I might give it a try!
Newbie
Joined: Apr 2011
Posts: 1
Likes: 0
From: Winfield, BC
Year: 1998
Model: Cherokee
Engine: 4.0
I have been watching your YouTube channel for a few months now and had no idea you guys started here. And... until I noticed the BC plate I had no idea you are local.
I am looking forward to following all of your posts and videos as they come.
P.S. You should arrange a fan meet, greet and wheel this summer. I would be stoked to hang with you and Tommy over a few cold PBR's
I am looking forward to following all of your posts and videos as they come.
P.S. You should arrange a fan meet, greet and wheel this summer. I would be stoked to hang with you and Tommy over a few cold PBR's
CF Veteran
Joined: Jun 2014
Posts: 1,116
Likes: 1
From: Miami
Year: 90
Model: Cherokee
Engine: 4.0
Ok guys. 28 pages in, 3 major holidays, and 5? (I think) minor ones, with no updates.
I'm not gonna speak for all of us, but we all miss you.
Where. Are. You. Guys. Hiding?
I'm not gonna speak for all of us, but we all miss you.
Where. Are. You. Guys. Hiding?
Thread Starter
Seasoned Member
Joined: Feb 2014
Posts: 278
Likes: 4
We are still at'er boys.
Just been busy with a few projects. Don't worry, a lot of that has to do with the XJ, but a few don't.
Did some work with other YouTube channels and something for the old boob tube.
We'll let you know about that when we're allowed to.
Thanks for your support guys, and bear with us until we roll the next things out.
In the meantime, grab you's a PBR and check out what we've been posting on Instagram.
There are links on our Facebook page for Tshirts too if ya wanna help with the cost that it takes to put all this together.
Got a lot coming,
So this is gonna make for a fun summer.
Just been busy with a few projects. Don't worry, a lot of that has to do with the XJ, but a few don't.
Did some work with other YouTube channels and something for the old boob tube.
We'll let you know about that when we're allowed to.
Thanks for your support guys, and bear with us until we roll the next things out.
In the meantime, grab you's a PBR and check out what we've been posting on Instagram.
There are links on our Facebook page for Tshirts too if ya wanna help with the cost that it takes to put all this together.
Got a lot coming,
So this is gonna make for a fun summer.
Senior Member
Joined: Feb 2015
Posts: 514
Likes: 15
From: South Georgia
Year: 1996
Model: Cherokee(XJ)
Engine: 4.0l
Patiently awaiting your updates....ok maybe not patiently since I check youtube everyday to see if you've posted any new videos....great job keep up the good work.