Some pics of the floor pans.https://cimg2.ibsrv.net/gimg/www.che...6abf99e055.jpg

the rust was all the way through


https://cimg3.ibsrv.net/gimg/www.che...069755b4af.jpg

back by the leaf mount


https://cimg4.ibsrv.net/gimg/www.che...7f51817226.jpg

pass side floorpan is rusted away


https://cimg5.ibsrv.net/gimg/www.che...d45e5545c3.jpg

a bunch of rust flakes in the rails


https://cimg6.ibsrv.net/gimg/www.che...8f1e1f6e37.jpg

started cutting it all out


https://cimg7.ibsrv.net/gimg/www.che...c9e8fa09df.jpg

both sides cut completely out


https://cimg8.ibsrv.net/gimg/www.che...5f486f86c7.jpg

I left the tranny tunnel intact


https://cimg0.ibsrv.net/gimg/www.che...ec4d060194.jpg

the only thing left original is the tunnel


https://cimg1.ibsrv.net/gimg/www.che...ad3f91f4aa.jpg

https://cimg2.ibsrv.net/gimg/www.che...5b9efb956a.jpg

luckily the rails are not rusted


https://cimg3.ibsrv.net/gimg/www.che...54da2c1da1.jpg

I broke one of the tranny mount bolts, this shows the top of it


https://cimg4.ibsrv.net/gimg/www.che...2b02bfc6c6.jpg

the tools i used to do the floorpans


https://cimg5.ibsrv.net/gimg/www.che...3ff79bd444.jpg

https://cimg6.ibsrv.net/gimg/www.che...cd81e57fb7.jpg

https://cimg7.ibsrv.net/gimg/www.che...cc08e37bd2.jpg

this is the material I used for the floor pans, it's aluminum roofing


https://cimg8.ibsrv.net/gimg/www.che...df88dca9f4.jpg

this stuff was 10$ from a local repurpose store and i could always take this out and weld in proper sheet later.


https://cimg0.ibsrv.net/gimg/www.che...6bd4abb2c5.jpg

tin snips and a board for a straight edge/form brake and I'm in business


https://cimg1.ibsrv.net/gimg/www.che...0665224ed8.jpg

I cut it all square, bent it all straight and rivoted it in.