Outlaw Red
#1
Member
Thread Starter
Join Date: Sep 2010
Location: Spotsylvania VA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Outlaw Red
New project. 1992 Laredo. Picked this sweetheart up last week. 286K NO RUST and EVERYTHING WORKS!Drive train is solid. Leaks oil from valve cover. Found last night all the cover bolts were loose so that may be fixed. And, YES that is my Prius in the background LOL
Can't wait to get started
Can't wait to get started
#7
Member
Thread Starter
Join Date: Sep 2010
Location: Spotsylvania VA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Update
Been busy on the XJ!
New Ball joints upper and lower both sides.
NOTE: Do NOT pound on lowers, they will mushroom and be a B#%*H to get out. Install plug in lowers grease zirk hole before replacing axles. There is not enough clearance for axle u-joint for grease fittings.
New Brakes all around.
NOTE: Take pictures before disassembly
New CV joint boot.
NOTE: This is more delicate than you would think and rips easily.
New Track bar
NOTE: Remove UPPER end first o it won't come out
New rear axle seals both sides.
NOTE: Much easier than you would think
New valve cover gasket.
NOTE: Get ALL of the old gasket off. Hard work
Degrease engine and undercarriage, much easier to work on.
NOTE: Pressure washer helped a lot just keep it away from wiring or be prepared to wait for it to dry out.
New wiper blades
New Ball joints upper and lower both sides.
NOTE: Do NOT pound on lowers, they will mushroom and be a B#%*H to get out. Install plug in lowers grease zirk hole before replacing axles. There is not enough clearance for axle u-joint for grease fittings.
New Brakes all around.
NOTE: Take pictures before disassembly
New CV joint boot.
NOTE: This is more delicate than you would think and rips easily.
New Track bar
NOTE: Remove UPPER end first o it won't come out
New rear axle seals both sides.
NOTE: Much easier than you would think
New valve cover gasket.
NOTE: Get ALL of the old gasket off. Hard work
Degrease engine and undercarriage, much easier to work on.
NOTE: Pressure washer helped a lot just keep it away from wiring or be prepared to wait for it to dry out.
New wiper blades
Last edited by Rikkadog; 11-21-2010 at 05:28 AM. Reason: clarification
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
10-22-2023 04:16 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
09-29-2015 06:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)