Operation Clean-manche
#16
CF Veteran
Thread Starter
It has an aftermarket mechanical oil pressure gauge in the dash bezel and I broke the oil line that leads to it
#18
No, I don't lick fish.
How am I not already subscribed to this thread? And why aren't you posting more updates? C'mon man!
#20
CF Veteran
Thread Starter
#21
CF Veteran
Thread Starter
Finally an update!
Fixed the rust spot, ground down all other surface rust and threw some primer on it.
Cleaned up the carpet and all other trim pieces
Then installed a new stereo system (old system was shot and from the 90s)
I went with an 8" sealed kicker sub, 2 pioneer 6x9s, and 5.25 pioneers for the doors, all powers by a 700w Sony amp. It sounds good now but still needs tuned.
I'm so happy I finally got around to doing this haha
Fixed the rust spot, ground down all other surface rust and threw some primer on it.
Cleaned up the carpet and all other trim pieces
Then installed a new stereo system (old system was shot and from the 90s)
I went with an 8" sealed kicker sub, 2 pioneer 6x9s, and 5.25 pioneers for the doors, all powers by a 700w Sony amp. It sounds good now but still needs tuned.
I'm so happy I finally got around to doing this haha
#22
No, I don't lick fish.
SHEESH! You must have short legs, man. At 6'1, I have to have the seat all the way back in an MJ... kinda jealous that you have that much room behind the seat. Not that I have an MJ, but that is one of the reasons I DON'T have one. Kinda only big enough for ME in the cab of 'em.
#23
CF Veteran
Thread Starter
SHEESH! You must have short legs, man. At 6'1, I have to have the seat all the way back in an MJ... kinda jealous that you have that much room behind the seat. Not that I have an MJ, but that is one of the reasons I DON'T have one. Kinda only big enough for ME in the cab of 'em.
#24
No, I don't lick fish.
#25
CF Veteran
Thread Starter
#26
CF Veteran
Thread Starter
Couple small updates.
Found some cup holders from AutoZone that fit perfectly
A buddy of mine broke the little ash tray/ change thing in the middle of the dash on accident, so I put this in to fill the ugly open spot for now. Made it a little less of an eyesore, but not by much haha
Replaced the headliner, finally!
Also replaced valve cover gasket, upper radiator hose, and front brakes and rotors.
Got some bigger plans for the future, but just gonna chip away at smaller things for now. Should have another update by the end of the weekend!
Found some cup holders from AutoZone that fit perfectly
A buddy of mine broke the little ash tray/ change thing in the middle of the dash on accident, so I put this in to fill the ugly open spot for now. Made it a little less of an eyesore, but not by much haha
Replaced the headliner, finally!
Also replaced valve cover gasket, upper radiator hose, and front brakes and rotors.
Got some bigger plans for the future, but just gonna chip away at smaller things for now. Should have another update by the end of the weekend!
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
05-05-2024 12:21 PM
ROCKRIDGE 4WD
Vendor Showcase
13
11-05-2019 10:58 AM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
09-25-2015 08:16 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-24-2015 03:44 PM
Capxxiv
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-22-2015 03:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)