Not really a build but i was asked for pics.
#1
Seasoned Member
Thread Starter
Join Date: Dec 2008
Location: Chattanooga, TN
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Not really a build but i was asked for pics.
Well as stated in my intro thread, I dont have any of the good pics of the build cause my laptop with all the good pics was stolen out of my honda in a BestBuy parking lot Anyways, heres what ive got
The Beginning: lifted it before i even had a drivers liscense
A few mods: Painted flares, built a roofrack, soft 8's
Tube work and 33's
A closer shot:
Boggers 35"
The Beginning: lifted it before i even had a drivers liscense
A few mods: Painted flares, built a roofrack, soft 8's
Tube work and 33's
A closer shot:
Boggers 35"
Trending Topics
#9
Seasoned Member
Thread Starter
Join Date: Dec 2008
Location: Chattanooga, TN
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
No im going to do an interior cage. Ive seen exo cages cause more body damage than an actual rollover. Also, the way my tube work is set up now, it wouldnt be strong enough to support an exo cage in the event of a rollover. It would be stronger/safer to put it on the inside and just run the tube through the floor and weld it to the "frame". And yes, yes i AM going to reinforce the uni with some 14ga steel.
#11
Seasoned Member
Thread Starter
Join Date: Dec 2008
Location: Chattanooga, TN
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I hardly ever drive it on the street. Givin that im in town. I live in Chattanooga but i go to school at ETSU up in Johnson City which is about 4 hrs away so I only come home about once a month. And half the time I am in town im with my girl so you know how that goes and the majority of the time im out, im drivin the Honda (i know i know) lol
#15
Junior Member
Join Date: Dec 2008
Location: The Brighter Side of Washington
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0
Nice!!
Do you have any steering issues with that crossover setup? Its a Rugged Ridge right? Ive put RR on mine and it wanders /jerks around a bit. I was wondering if the steering brace would help at all. Does the right TRE rub the tire on hard left turns????
Again nice rig!!
Do you have any steering issues with that crossover setup? Its a Rugged Ridge right? Ive put RR on mine and it wanders /jerks around a bit. I was wondering if the steering brace would help at all. Does the right TRE rub the tire on hard left turns????
Again nice rig!!