My XJ Build... fueled by financial aid refunds
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
In my opinion, I would try to do the wj knuckle conversion and run 1 ton TRE's if you have the funds.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
here's an update. went to uwharrie had a pretty good time. going back in may. armymedic broke his rear transfer case shaft. Ill have pics soon of the trip once I get them from my girlfriend but heres some pictures from wheeling today around town.



workin on gettin off the ground



workin on gettin off the ground
Last edited by mattphillips90; Apr 2, 2013 at 08:36 PM.
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
Preciate that! Yes very very soon.problem is i live in an aprtment so i dont have an area to fab some axle in. I was at least trying to find some axles that came off an xj like some 44's that would bolt up but i couldnt find them in time for me to regear. Once i graduate, get a real job and a house im plannin some full width 60's so i can run 40's
Senior Member
Joined: Jun 2010
Posts: 689
Likes: 2
From: Payson, UT
Year: 1993
Model: Cherokee
Engine: 4.7L I6
Preciate that! Yes very very soon.problem is i live in an aprtment so i dont have an area to fab some axle in. I was at least trying to find some axles that came off an xj like some 44's that would bolt up but i couldnt find them in time for me to regear. Once i graduate, get a real job and a house im plannin some full width 60's so i can run 40's
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
Nice man, yeah when i did my first axle swap, i had just got married and lived in an apartment..luckily my buddy let me build at his house.. And just my input, front 60 kingpin is great..rear 60, not so much imo..find a 14 bolt or a Sterling. You can run 40s all day long on a stock 14 bolt and never have a problem, just shave it down..ballistic fab sells a shave kit and shaved gears..which makes it super easy to do. You'll be glad you did! Anyway, keep up the good work!
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
so I give you the money for the axles, you make brackets for the axles at your fancy work. take a sweet road trip down here and help me put em on?




