Look at the first pic, he did the wheels too.

 

What brand are your tires?

 

Fierce Attitude M/T's, branded kelleys in some places, made by goodyear

 

I like em!!! How big they make em?

 

http://www.fiercetires.com/tires/att...mt/index.html#

 

Thx I looked em up, only up to 35

 

Nice build so far man! Keep it up.

 

looks alot better without the tint. and pictures of the inside?

 

Well, I have a few pics of the interior, but it aint nothing special. I now have a locker, and a ruff stuff diff cover for the rear. I hope my door will be back on this week.

 

Ok, still no Pics, I had to move. I did however get my aussie locker, and ruff stuff cover in. If I ever find my cord for my camera, I will get some more pics up.
I have to say, though I've only driven the jeep a few hundred yards with the locker back there, it is very quiet, and most definitely works.

 

A couple poser pics, I pulled a branch the size of a smaller oak tree today, with the thick part being about 1 ft in diameter, and probably close to 30 ft long, and both tires were digging hard, had to put it in 4 low to pull it up the hill.

 

Great build, any updates? How do you like those unibody tie ins, does it feel like the chassis is stiffer now?

 

Whats the actual size of those tires? 31? 33?

I have 31s on zero lift with trimmed fenders and I want to lift it a bit to give more clearence but im just worried the tires are going to look tiny. I've trimmed less than you have on yours. or rather less than the previous owner did to yours.

nvm, I see the answer. Might look ok for me.

 

Want A Cherokee, no they don't make it any stiffer, they are for steering box reinforcement, and bumber tie ins.

Ottowa, they would be 32 10.50's

Ok, so I cannot find my camera, but I have done hood vents to it. I recently put a clutch and a master cylinder in it. The slave cylinder started sticking on me, so I was having to dump the clutch, and now I either broke the input shaft on my ax-15 or broke the clutch hub, I will find out tomorrow, and try to ake pictures of the mess.

 

Ok been a while, but I haven't done much to the old girl, but I do have some wheeling pics to share, and also I do have some tie rod flip inserts that are going on this week. I have just arranged with a guy to get his 3.73 up carrier (new), and 4.56 gears and install kit for cheap for the D30.


http://s676.photobucket.com/albums/v...%20Oct%202011/