Started into the process of building a real cool XJ. I have a long way to go but about 5-6 hours of work yesterday the RC 3" lift and BFG AT's are on. 31's are rubbing so have have to do some cutting yet. Here are a few pics. More of the total stance will be posted





tomorrow!

 

I am getting some driveline noise. I did lower the transfer case and I was wondering how long I can drive on it like this without too much worry. Greased everything I can for now. I am going to lower the tcase but is it really going to hurt it much if I put it off for a couple weeks. Crazy schedule wont let me do it now? Any thoughts?

 

u dont have to lower the t case for three inches. go any higher and you should though. it wouldnt hurt to drop it now but if your not getting any vibes then dont mess with it

 

yeah no vibes but the noise is obviously concerning. So you think its no biggy?

 

well i have 5 inches of lift and didnt lower TC have vibes but nothing to worry about

 

i think it all depends on the lift and as weird as it might sound, the year. I have a 98 XJ with 6.5 inchs of lift and dont have any vibes at all

 

you have a really clean xj, what all do you plan on doing to it?

 

Being that this is titled as a build thread I have moved it from Fabrication. It is a pretty old topic and the OP only has a handful of posts, so you may not get a reply. You can try sending the OP a private message, which may trigger an email alert that he or she might see.