Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

My 2001 XJ limited build thread

Thread Tools
 
Search this Thread
 
Old Feb 24, 2010 | 08:24 PM
  #16  
leo3000's Avatar
CF Veteran
 
Joined: May 2009
Posts: 1,537
Likes: 1
From: AL
Year: 2001
Model: Cherokee
Engine: 4.0l
Default

looking good
Reply
Old Feb 24, 2010 | 08:34 PM
  #17  
grn99's Avatar
Senior Member
 
Joined: Jan 2009
Posts: 836
Likes: 3
From: Redford MI
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Default

Originally Posted by baycountry16
Yeah I really liked the look of the Geo M/T's and from what I have read they are good on the street as well. So I'll need to do some trimming to fit that size with a 3" lift? I hadn't really planned to do that. I might have to re-evaluate what size tire I want to go with. I actually think I might sell the wheels to recoup some money if interested? The're still in really good shape minus the normal wear and tear. As you can see, I am missing the center cap on one, but those are pretty easy to find to replace
Where are you located? Pm me with a price maybe we can set something up. Those pro comps are bad azz.
Reply
Old Feb 24, 2010 | 10:44 PM
  #18  
baycountry16's Avatar
Thread Starter
Member
 
Joined: Jan 2010
Posts: 170
Likes: 0
From: Kensington, MD
Year: 2001 XJ Limited
Model: Cherokee
Default

Thanks everybody. The funny story about those wheels was that I had ordered Black Rock Steel D-Windows. They were on backorder for about a week when I came across a picture of a jeep with those Pro Comp wheels and it looked awesome. I called the place I ordered the Black Rocks from and asked if they could cancel those and send me these instead. So it all worked out except that these cost about $40.00 a piece more than the black rock's.
Reply
Old Feb 26, 2010 | 12:13 PM
  #19  
baycountry16's Avatar
Thread Starter
Member
 
Joined: Jan 2010
Posts: 170
Likes: 0
From: Kensington, MD
Year: 2001 XJ Limited
Model: Cherokee
Default

I just finished up the last part of the lift last night by putting the carpet in the rear back in place. That sure was a great easy method for replacing the upper rear broken shock bolts. Now, you never even would know I had cut holes in the bed of the jeep. I forgot to take pictures of the pieces of aluminum I cut and covered the holes with. I basically just cut larger pieces of aluminum put some waterproof slicone sealant on the bottom side to glue in place over the holes, and then used sheet metal screws to hold it in place. Now it's on to buy the new tires next week! Here's some before and after of the back area:
Attached Images   
Reply
Old Mar 6, 2010 | 01:15 PM
  #20  
baycountry16's Avatar
Thread Starter
Member
 
Joined: Jan 2010
Posts: 170
Likes: 0
From: Kensington, MD
Year: 2001 XJ Limited
Model: Cherokee
Default

I finally got my new tires put on yesterday, and I decided to go with BF Goodrich All Terrain KO's. I went with 265/70R16 for the size. I really liked the aggressive looks of these tires but also needed a good street tire because this is my DD. I still can't really drive it yet because I'm getting it aligned on Monday. Also, the front tires rub pretty bad in the front on the front fender whenever I'm turning and the front suspension is flexed a little bit. My mechanic is going to fix that for me. He is actually going to try sliding the whole bumper forward a little bit and trim as necessary. He actually came up with a pretty good idea for trimming instead of cutting. Because it is plastic, he is going to heat it up and bend it. I don't know how it will turn out, but he'll do a much better job than me. Here are some before, after lift, and after lift with tire pics. I am now completely broke, but here are a few things I do want to eventually put on:

1. K&N Cold Air Intake
2. New Helix Throttle Body
3. Olympic Nerf Bars
4. Bushwacker Flares - Maybe?
5. Replace vent window that doesn't match with factory tint vs. privacy tint ( that is what's on there now)

I'm sure the list will continue to grow!
Attached Images    
Reply
Old Mar 6, 2010 | 06:06 PM
  #21  
Alex's Avatar
Member
 
Joined: Nov 2008
Posts: 115
Likes: 1
Model: Cherokee
Default

lookin sharp
Reply
Old Mar 16, 2010 | 11:05 AM
  #22  
baycountry16's Avatar
Thread Starter
Member
 
Joined: Jan 2010
Posts: 170
Likes: 0
From: Kensington, MD
Year: 2001 XJ Limited
Model: Cherokee
Default

Here are some more post lift pics. It's running great! I got td I swear it runs the alignment done, an I swear it runs smoother now with bigger tires than it did before the lift
Attached Images    
Reply
Old Mar 16, 2010 | 11:12 AM
  #23  
baycountry16's Avatar
Thread Starter
Member
 
Joined: Jan 2010
Posts: 170
Likes: 0
From: Kensington, MD
Year: 2001 XJ Limited
Model: Cherokee
Default

I just did another small project I've been wanting to do for years. I replaced the drivers side rear vent window because the tint never matched ever since I bought the jeep 5 years ago. I have always hated the way it looked, and it was one of those little things that just drove me nuts! It must have been broken at some point and when they replaced it, they didn't match it to the rest of the vehicle. I grabbed one at a junkyard for $30.00, and it was actually pretty easy to replace. Here are some pics:
Attached Images      
Reply
Old Mar 16, 2010 | 04:56 PM
  #24  
offroadnut36's Avatar
CF Veteran
 
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
Default

Wow man. Definitely looks sweet.
Reply
Old Mar 16, 2010 | 05:13 PM
  #25  
baycountry16's Avatar
Thread Starter
Member
 
Joined: Jan 2010
Posts: 170
Likes: 0
From: Kensington, MD
Year: 2001 XJ Limited
Model: Cherokee
Default

Thanks man, I really do appreciate it. I just wish I had more money to do more things! It is addictive. Next, I want to do a new front bumper with KC lights, rear bumper, and rock sliders on the side. That will probably have to wait a while though.
Reply
Old Dec 9, 2011 | 05:59 AM
  #26  
restoring's Avatar
Seasoned Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2011
Posts: 459
Likes: 10
From: Near Memphis, TN
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Really nice XJ, nice build thread, and those wheels are sweeeeeeeet! I wanted nicer ones but could only cover new steelies for now.

Subscribed!

Good luck with the rest of your mods!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stimp774
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
Apr 16, 2017 03:46 PM
Ianf406
Modified XJ Cherokee Tech
15
Sep 13, 2015 01:33 PM
BlvdKreeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 8, 2015 04:03 PM
Parker00XJ
Jeep Builds
0
Sep 6, 2015 12:30 AM
joshjeepnoob
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Sep 4, 2015 07:20 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:57 AM.