I like it man. How'd you get the fender trim so damn clean?

 

3" cut off wheel and blue painters tape for my lines

 

got to work on my dash cant wait to have this in and ill have a big *** gps and what not lol

 

well i swapped motors again from my parts jeep lol this time took 2 days











got the header on

 

meet with a few people




then i started on a led project for my 3rd brake light




testing



and made another that dose brake and turn signal

 

no updates really just saving
but got last of the parts off the parts jeep and got rid of that and swapped my airbag covers






air bag and controls new vs old






random flex front still connected







need to bump stop the rear better

 

my jeep next to a jk with 3" lift




painted all the front black before and after










random shot of mine and my grandfathers


heres some shots from cpo event dropped a spring had chaos offroads truggy lift me up so i can put it back.new retainers are ordered














got a new door to replace one bad one and got some roof cross braces

 

when i got the door i found a 04 color matched grill made that fit






pic with the jeep that has my old springs





then made some new cuts

 

 

part for my winter project slowly buying shiz for the build

 

i picked up a winch plate for 30 of cl the plan is to weld it into the old bumper mounts
how the mounts were


i set the plate there just so i can see in my head


took off the harpoons flipped them up and slide the plate in i still need to clean them up so i can slide that plate back all the way but kinda get the idea how it will be

 

busted out the band saw to clean up the crap





got it sitting back alot further still need to tweak the harpoons and square off the ends

 

busted out the band saw to clean up the crap





got it sitting back alot further still need to tweak the harpoons and square off the ends

 

so i got a winch for fitment still have tweaking to do and that strap was barely holding it up while i made sure it had clearance will all be level when it gets welded up. what do you guys think open to ideas

 

no real updates got a new ds finally the right yoke new rear a arm bushings in