Johnny Boots 98 XJ Build
#35
Member
Thread Starter
Join Date: Nov 2010
Location: Greensboring, NC
Posts: 220
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Still haven't had time to finish the front lift but I did get a ZJ V8 tie rod on this. Took all of 15 minutes on my lunch break.
This picture sucks but whatever, it's a tie rod.
This picture sucks but whatever, it's a tie rod.
Last edited by ih8cornnuts; 05-08-2014 at 08:01 AM.
#36
Member
Thread Starter
Join Date: Nov 2010
Location: Greensboring, NC
Posts: 220
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Got my rustys crossmember drop in too. Very nice piece, although one of the 15mm bolts wouldn't line up so the hole needed to opened up a bit. We'll see how it works out.
#38
Member
Thread Starter
Join Date: Nov 2010
Location: Greensboring, NC
Posts: 220
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
And got my front lift on...about effing time. Still looks stock lol. Tires will go on the fronts this weekend. Next up? Sway bar discos and rear discs, bump stops too, mine crumbled off both front and rear.
#39
CF Veteran
Join Date: Sep 2010
Location: NC
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 L
Looks good to me. If you modify your fenders and put 31s on with back spacing it'll be badass and still have good road manners and acceleration.
#40
Member
Thread Starter
Join Date: Nov 2010
Location: Greensboring, NC
Posts: 220
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
I ended up with Cooper AT3's in 31" so I could really use a small trim and bump stops before heading to the trails. I bought a set of spacers, although they're a short term solution. I'm not crazy on the idea of using them but I also didn't want to buy a set of wheels right now.
I'd like to push another 1-2" out of the lift with either some combo of spacers, ACOS, Shackles of the OME AAL. I'll probably toss a track bar on before years end and a set of LCA's if I go forward with the additional lift.
I'd like to push another 1-2" out of the lift with either some combo of spacers, ACOS, Shackles of the OME AAL. I'll probably toss a track bar on before years end and a set of LCA's if I go forward with the additional lift.
#41
Member
Join Date: Aug 2012
Location: Long island ny
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
looks good but i just have something about loving a kayak on the roof of a xj that looks bad *** and i dont even kayak lol makes me want to get into it
#45
Member
Thread Starter
Join Date: Nov 2010
Location: Greensboring, NC
Posts: 220
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Thanks Battle. I'm building some homemade discos as we speak. Hopefully they'll be done and mounted by the end of the month along with my rear discs.
A locker will be next year, I'd like either a truetrac or air-locker that way I can use the OBA to fill tires. It's not a rock crawler/mud bogger so drive-ability is key.
I'd also like to add another 1-2" but it'll wait until next year. I'll probably do JKS ACOS up front with an OME AAL out back.
A locker will be next year, I'd like either a truetrac or air-locker that way I can use the OBA to fill tires. It's not a rock crawler/mud bogger so drive-ability is key.
I'd also like to add another 1-2" but it'll wait until next year. I'll probably do JKS ACOS up front with an OME AAL out back.