jkw's 95 xj
#31
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
and for the $3 clear front facing turn signals. i took a dremel with a cut off and cut the factory lights as close as i could to the front while still keeping a straight cut. cut the front completely off. wiped out the dust and sanded the inside a bit then wiped with alcohol. took em out in the sun and sprayed with black bbq grill paint(first can of black i saw). took the sheet of lexan i got from lowes for $3 n made a template of the turn signal n marked it out with sharpie. then took the dremel n chopped it out. removed the protective plastic off the lexan after cutting it and hot glued it to the turn signal(used hot glue so i can remove the lexan later on if i want to run drl's in the lenses too). reassemble and enjoy
Last edited by jkw; 04-20-2012 at 09:29 PM.
#33
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
finished my hood vents and got my temp gauge hooked up again as well as getting a $10 harbor freight ooga horn hooked up for ****s and giggles. i gotta say, i was impressed with how much heat the vents let out. next undertaking will be actually finishing my diamond plate 1/4 panel gaurds
#34
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
i guess this means i actually gotta clean out the back of the xj so i can take the interior panels off nn bolt these puppys to the quarter panels
#35
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
got the 1/4 panel gaurds and l&l bumper on. just gotta drill some holes for the winch and ill be in business. no pics of the gaurds or bumper, got distracted n went for a little late night wheeling trip in pasco
#38
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
got a lil work done on the back too to level it out. no more sway bar and added some of the chevy drop shackles to even things out. rides a lil higher in the rear but it has a smoother ride. gives a nice amount of droop too. and since the back bumpstops were pretty much gone, i snagged a pair of bumpstops off a honda passport in the junkyard. bolt holes line up perfectly. made for a simple remove and replace procedure
Last edited by jkw; 05-03-2012 at 06:22 PM.
#40
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
looks just like my xj when i started right? well its not, its a 92 laredo with a 4.5" rustys lift and some other goodies thats now mine
#41
CF Veteran
Join Date: Jun 2011
Location: Alabama
Posts: 4,618
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: I6
I think I saw that bumper on cl. I'm moving down for the summer. Maybe we can meet up and wheel once I get another xj.... And lift it....
#42
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
ya it was on cl, sold in a couple weeks. if u move down here give me a shout. me n a buddy from usf are pretty much just gonna be building the **** outta my xj while we have the time
#45
Member
Thread Starter
Join Date: Dec 2011
Location: hernando, fl
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
its been a while but i've mostly just been wheeling the jeep and working on the foxbody. considered selling my jeep when money got tight but luckily i didnt need to. had a mild side flop while riding at new york ave at night. luckily the sand bank kep it from going completely on its side and really messin stuff up