Jeep Cherokee Table
#1
Newbie
Thread Starter
Join Date: Apr 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Jeep Cherokee Table
Hi newbie here but used many types of forums so i know what im doing most of the time lol
I have a DT (design and technology) project that im doing at school, i practically finished it today and just want opinions from Cherokee owners and fans of what they think of it please?
Positive or negative
Its a table made from recycled parts, leather wrapped around some plywood, fully threaded stem with bolts on each ends to keep it strong and the main part, the Jeep Cherokee alloy wheel
Its not the best paint job ive done, but bought the wheel from the scrapyard, cleaned it up, primer and paint.
I sprayed the centre gold as there was plenty of it available so thought i would try it for a laugh, it turned out quite well i think
The finished result
I hope to sell it on when its been marked and assessed
Thanks
(i hope the pictures are not too large)
I have a DT (design and technology) project that im doing at school, i practically finished it today and just want opinions from Cherokee owners and fans of what they think of it please?
Positive or negative
Its a table made from recycled parts, leather wrapped around some plywood, fully threaded stem with bolts on each ends to keep it strong and the main part, the Jeep Cherokee alloy wheel
Its not the best paint job ive done, but bought the wheel from the scrapyard, cleaned it up, primer and paint.
I sprayed the centre gold as there was plenty of it available so thought i would try it for a laugh, it turned out quite well i think
The finished result
I hope to sell it on when its been marked and assessed
Thanks
(i hope the pictures are not too large)
#2
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Very creative use of a Jeep part. Might be a good conversation piece in the garage, while taking a break with buds and beers.
Welcome to CF from Dan in Tenn.!
Welcome to CF from Dan in Tenn.!
#3
CF Veteran
That really is a creative use for spare parts. I'd say it would go great in a batchler pad. I know that cause my wife would kill me if I brought something like that into the house..
Trending Topics
#8
#9
CF Veteran
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
Nice table I want one.
This also reminds me of what my uncles friend did. He took the front clip off a CJ and used the grille and fender fronts and turned it into a headboard for his bed. lol He even put the lights in and wired them so you can plug them in and they work.
This also reminds me of what my uncles friend did. He took the front clip off a CJ and used the grille and fender fronts and turned it into a headboard for his bed. lol He even put the lights in and wired them so you can plug them in and they work.
#11
Newbie
Thread Starter
Join Date: Apr 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
16 inches to where the leather and wood is, from the bottom to the top bolts, 17 inches
Im in United Kingdom, it was 11pm when i said i would measure for tomorrow
That was my original idea, but would have cost me alot of money and couldn't afford much with being student
Thanks again people!
Im in United Kingdom, it was 11pm when i said i would measure for tomorrow
Thanks again people!
#12
CF Veteran
Hmmm ... a gold honeycomb XJ wheel ... where have I seen that before? Possibly on my XL Limited when I first bought it? ummm, YES!
I knew there would be a use for those one day. Very creative.
I knew there would be a use for those one day. Very creative.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)