Fun with 2 Jeeps
10-31-2014, 11:33 AM
#16
Member
Thread Starter
Join Date: Oct 2012
Location: Manitoba
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
I also changed out the dpa I installed in place of the original as the steering felt loose and liked to wander. Huge difference and after adjusting my iro uppers a couple of times I believe I found the happy medium, the jeep self centres fairly well and the vibration that I originally had after the lift is greatly reduced still noticeable by me. I believe this vibration was due to the angle of the front driveshaft. These changes were made when I was strictly front wheel drive, thank god that will be over after Sunday. So now I'm on the lookout for a good alignment shop for lifted jeeps, after the last one I went to completely screwed me over. The thing is I have a new trackbar coming in 2 weeks, a rock krawler! Can't wait to change that out for my creaking rustys tb and not so beef rough country drop bracket.
Last edited by canada_man; 11-20-2014 at 12:41 PM.
10-31-2014, 12:33 PM
#17
Senior Member
Join Date: Jul 2014
Location: St. Louis
Posts: 793
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 Liter I6 PowerTech
Still new to the jeep world but learning lots these past few months. The 98 is on blocks without axles and the 90 has been receiving the grand treatment. 4.5 zone lift with nitro shocks, c8.25 and d30 both with 4.10 gears, jks quick discos and an re sye that I'm still working on.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)