First of Many (XJ Build)
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
But glad to hear that!
CF Veteran
Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Senior Member
Joined: Oct 2010
Posts: 503
Likes: 1
From: pennsylvania
Year: 1996
Model: Cherokee
Engine: i6
Take the #1 spark plug out sticks long screw driver in it and manually turn the crank shift pulley til the piston reaches the top of the engine then make sure ur distributor is on timing and put it back in place if u haven't tried that yet jut had that problem wit mine
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Take the #1 spark plug out sticks long screw driver in it and manually turn the crank shift pulley til the piston reaches the top of the engine then make sure ur distributor is on timing and put it back in place if u haven't tried that yet jut had that problem wit mine
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Maybe. You have any ideas? I have a stock spare lol
Junior Member
Joined: Aug 2012
Posts: 60
Likes: 0
From: Irvine, CA
Year: 1995
Model: Cherokee
Engine: 4.0 Straight 6 HO
if you have a stock spare its fine in the back. i was just wondering if you went bigger what you were planning on doing with it, whether you were going to leave it in the back or go swingaway carrier. I'm personally going with the dirboundoffroad rear tire carrier
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Here are my plans for the Xj over the next year.
First- Flat bushwackers
Second- 33x12.5 inch Nitto trail grapplers with bigger but the same wheels and half inch spacers
third: I need a full size spare, so maybe a rear bumper with a swing away tire carrier?
Fourth:Bed line lower panels near door trim
fifth: Flowmaster?
sixth: Roof rack?
First- Flat bushwackers
Second- 33x12.5 inch Nitto trail grapplers with bigger but the same wheels and half inch spacers
third: I need a full size spare, so maybe a rear bumper with a swing away tire carrier?
Fourth:Bed line lower panels near door trim
fifth: Flowmaster?
sixth: Roof rack?
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Here are my plans for the Xj over the next year.
First- Flat bushwackers
Second- 33x12.5 inch Nitto trail grapplers with bigger but the same wheels and half inch spacers
third: I need a full size spare, so maybe a rear bumper with a swing away tire carrier?
Fourth:Bed line lower panels near door trim
fifth: Flowmaster?
sixth: Roof rack?
First- Flat bushwackers
Second- 33x12.5 inch Nitto trail grapplers with bigger but the same wheels and half inch spacers
third: I need a full size spare, so maybe a rear bumper with a swing away tire carrier?
Fourth:Bed line lower panels near door trim
fifth: Flowmaster?
sixth: Roof rack?
Sounding great, Blake.
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Sorry for being away so long! The Jeep is running great with the new engine, which only has 77k miles on it. I am going to install a maglite mount hopefully soon on the opposite side of my CB.
Nice looking XJ man!!! Good work ya got going on..