First of Many (XJ Build)
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Why RC for the long-arms?
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
Need an honest opinion here folks. Do the AEV Pintlers look to "yuppy" to y'all? I don't want the XJ looking like a barbie with 35's (JK). I Could just keep my current wheels but they may be a little small.

Note: I would replace the yellow center cap with a gray cap
Here's the only XJ I could find with Pintlers, and they are silver and not the dark gray:

Note: I would replace the yellow center cap with a gray cap
Here's the only XJ I could find with Pintlers, and they are silver and not the dark gray:
Last edited by BlakeAnnexstad; Dec 20, 2013 at 06:21 PM.
Thread Starter
Member
Joined: Dec 2012
Posts: 193
Likes: 0
From: Alpharetta, Ga
Year: 2001
Model: Cherokee
Engine: 6 Cylinder 4.0
CF Veteran
Joined: Oct 2012
Posts: 2,314
Likes: 3
From: Canton, GA
Year: 1996
Model: Cherokee
Engine: 4.0
Not an exhaust system, just a muffler. It's a Thrush Welded and I do like it.. not too loud, just loud enough to where the idle is a bit more aggressive and I can hear it if I step on it. It drones a tiny bit at exactly 1600 RPM. Doesn't do it at 1500 or 1700, so I dunno what's up with that.



