first jeep build.
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: silverdale wa
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 inline 6
first jeep build.
hello every one. i got my first jeep a couple months ago and i love it. its a 89 jeep xj. over time im gonna repair/replace or upgrade. its gonna take time bbut most of my mods will be home made.
current plans for the jeep are as follows:
3in-4.5in RC suspension
front and rear axle rebuild
rino line the insides
roof rack
transfer rebuild
tranny rebuild
pvc snorkel
scrap off all the trim
well, i know more stuff is gonna come up but thats what i got for now. anyway, let me know any diy cheap tricks that your willing to give. .
thanks
current plans for the jeep are as follows:
3in-4.5in RC suspension
front and rear axle rebuild
rino line the insides
roof rack
transfer rebuild
tranny rebuild
pvc snorkel
scrap off all the trim
well, i know more stuff is gonna come up but thats what i got for now. anyway, let me know any diy cheap tricks that your willing to give. .
thanks
Last edited by this_storms; 08-03-2012 at 12:06 PM.
#2
Junior Member
Thread Starter
Join Date: Dec 2011
Location: silverdale wa
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 inline 6
i dont know where to post this question, so im gonna ask it here instead of opening another thread.. but, what welding machine would be considered bare minimum for welding onto the chassis or axle?
#3
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by this_storms
i dont know where to post this question, so im gonna ask it here instead of opening another thread.. but, what welding machine would be considered bare minimum for welding onto the chassis or axle?
Thread
Thread Starter
Forum
Replies
Last Post
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)