Ferrar Jeep Cherokee Build
#16
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
#17
Senior Member
Join Date: Apr 2011
Location: parker, co
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Originally Posted by ORFXJ
Not sure how much it would be to have just the lower half done, but its about 1K to have the lower half + the interior floor done
#18
Member
Join Date: Apr 2012
Location: Bloomfield, Mi
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 6 Cylinders S 4.0L MFI
[/QUOTE]
I love those rear quarter panels on the Blue Jeep. I saw them some where but can't remember. Does anyone know where they sell them? I'd really appreciate it! Thanks in advance!!
Last edited by MirMir; 04-26-2012 at 02:10 PM. Reason: Spelt a word incorrectly.
#19
Member
Join Date: Apr 2012
Location: Minnesota
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
they cost about 315$
#20
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
Well...Santa brought me a lot of goodies for Christmas...
Unfortunately I some how managed to delete the pics of my grimy axles before i started to rebuild them...Oh well...Here are a few shots of the 9" rear completely finished and the HP44 almost done...my good friend owns S&S Custom Off-Road in Prescott, AZ and was more than willing to help me out with the front and rear setups...only took us a couple of night to get them all cleaned up and put together...I would have never made it to Moab for EJS if it wasn't for Shane helping me cut some time out of the build!
The 9" specs: Superior 5.13 gears, Superior EVO 35 spline shafts, Superior aluminum third member, 35 spline Detroit Locker, F-150 rotors & Chevy calipers...
Th HP44 specs: Superior 5.13 gears, Superior 30 spline shafts, ARB Air Locker, modified t&t truss, REID Racing flat top knuckles, ARTEC Industries high steer arms, GM TRE's, Nitro HD aluminum diff cover, S&S Custom's steering and PSC hydro assist...
Unfortunately I some how managed to delete the pics of my grimy axles before i started to rebuild them...Oh well...Here are a few shots of the 9" rear completely finished and the HP44 almost done...my good friend owns S&S Custom Off-Road in Prescott, AZ and was more than willing to help me out with the front and rear setups...only took us a couple of night to get them all cleaned up and put together...I would have never made it to Moab for EJS if it wasn't for Shane helping me cut some time out of the build!
The 9" specs: Superior 5.13 gears, Superior EVO 35 spline shafts, Superior aluminum third member, 35 spline Detroit Locker, F-150 rotors & Chevy calipers...
Th HP44 specs: Superior 5.13 gears, Superior 30 spline shafts, ARB Air Locker, modified t&t truss, REID Racing flat top knuckles, ARTEC Industries high steer arms, GM TRE's, Nitro HD aluminum diff cover, S&S Custom's steering and PSC hydro assist...
#21
Member
Join Date: Apr 2012
Location: Bloomfield, Mi
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 6 Cylinders S 4.0L MFI
http://www.orfab.com/details.php?App...450&Title=JEEP CHEROKEE XJ QUARTER ARMOR WITH RAIL
they cost about 315$
they cost about 315$
#23
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
Managed to get all my engine parts back from the hot tankers; so i started to assemble the ATK long block engine slowly...
Finished assembling the ATK, grabbed a forklift and dropped it in...not all that fun trying to get it in with out a second body, but overall it went pretty smooth...
Time to pull out the axles and get down to the dirty work...
Prepped the frame for some Ruff Stuff Specialties XJ chassis stiffeners...
Cleaned and undercoated the entire undercarriage...
Finished assembling the ATK, grabbed a forklift and dropped it in...not all that fun trying to get it in with out a second body, but overall it went pretty smooth...
Time to pull out the axles and get down to the dirty work...
Prepped the frame for some Ruff Stuff Specialties XJ chassis stiffeners...
Cleaned and undercoated the entire undercarriage...
#24
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
#25
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Prescott, AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
Transmissions back and ready to go in...
2 spd. Atlas 3.8 also showed up right in time to join the party...
Started assembling the rear suspension and axles...
Managed to get the front done to and down on all fours...
2 spd. Atlas 3.8 also showed up right in time to join the party...
Started assembling the rear suspension and axles...
Managed to get the front done to and down on all fours...
#30
Junior Member
Join Date: Nov 2008
Location: Crittenden, Ky
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
all i have to say is...WOW!!!! This jeep looks amazing. great looking jeep and keep up the great work man, i really like your rear suspension set up too.