Ferrar Jeep Cherokee Build
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
I always thought about coloring on a red xj, but never wanted to try it before seeing it.. Looks amazing. May steal it if you dont mind. Probably the ferrari red and all.. Theres actually one running around my town that did the same thing as yours, except exactly opposite.
Glossy new red paint on bottom, and bedliner on top? But it fails in comparison to your rig.. By the way, where you keep that thing locked up at night ? 
And whats this i hear about a hat?? I'll buy a hat! Need one anyways.
Glossy new red paint on bottom, and bedliner on top? But it fails in comparison to your rig.. By the way, where you keep that thing locked up at night ? 
And whats this i hear about a hat?? I'll buy a hat! Need one anyways.
CF Veteran
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
where did you get your tru hi9 3rd member from? is it an entire assembly or just the case. either way, what did it cost
any fender clearance issues with the new meats?
any fender clearance issues with the new meats?
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 84
Likes: 0
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
I picked up the Hi9 direct from the guys at Hi9. It was about 2k fully setup(which I highly recommend you let them set up the gears and machine the ARB) trust me, it's worth the extra couple bucks to have them do it...I supplied the ARB.
The fenders are a little tight with the 37" but with the shock and bump stop setup I only had to trim a small amount off the front fenders. My comp cut setup in the rear was already perfect for 37's
The fenders are a little tight with the 37" but with the shock and bump stop setup I only had to trim a small amount off the front fenders. My comp cut setup in the rear was already perfect for 37's
CF Veteran
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
so they knocked of $800 because you supplied your own ARB. what size yoke did you go with and why? you're making me want one of these haha
Beautiful Build and Rig.
With all the armor and weight and 37" tires, You need one of these under the hood--



If you are ever on the East coast or Philly/New York area, come by for a ride, You will be impressed and have one ordered before you get home!
With all the armor and weight and 37" tires, You need one of these under the hood--



If you are ever on the East coast or Philly/New York area, come by for a ride, You will be impressed and have one ordered before you get home!
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 84
Likes: 0
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L
I'm running a forged 1350 yoke on the setup, larger joint is obviously stronger, but also keeps the joint cooler anytime your loaded up really heavy.
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 84
Likes: 0
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: ATK Performance 4.0L






