Dubs Taylor XJ Build! Its about time i made one
08-17-2012, 05:16 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Dubs Taylor XJ Build! Its about time i made one
Why didnt i make a good one of these. Well here it is
Started with this jeep. the truck i learned to drive in an was used harder then anything ever should.
To what it is currently
there could be more. I just dont remember as of now
Started with this jeep. the truck i learned to drive in an was used harder then anything ever should.
To what it is currently
Current MODS
Front Axle & Suspension
HP Dana 30
HP Dana 30
RC 4.5” coils
RC drop brackets
Ironman 4x4 upper and lower full adjustable control arms
Steering box brace plate
Ironrock lower shock mount
RC extended brake lines
6" drop pitmen arm
RC drop brackets
Ironman 4x4 upper and lower full adjustable control arms
Steering box brace plate
Ironrock lower shock mount
RC extended brake lines
6" drop pitmen arm
In progress
Super 30 inner axle tubes
Rokmen riddled diff cover
C-gussets and mid tube gussets
G2 4.88 gears
Heavy duty lower control arm brackets
Super 30 inner axle tubes
Rokmen riddled diff cover
C-gussets and mid tube gussets
G2 4.88 gears
Heavy duty lower control arm brackets
Rear Axle & Suspension
Chrysler 8.25 welded
Stock main leaf with ford ranger bastard pack
2” Rear lift shackles
1 ½” steel shim blocks
Stock main leaf with ford ranger bastard pack
2” Rear lift shackles
1 ½” steel shim blocks
In progress
Ford 8.8 31 spline disk brakes with ford LSD carrier
Rear full custom gusset
G2 super 4.88 gears
Rokmen riddled diff cover
Custom shock relocation upper and lower
Ruff Stuff specialties 3 position 3/8 perches
Front End
Rear full custom gusset
G2 super 4.88 gears
Rokmen riddled diff cover
Custom shock relocation upper and lower
Ruff Stuff specialties 3 position 3/8 perches
Front End
Custom winch Bumper
Smittybilt XRC 8000lbs winch
Rokmen weld-in shackles mounts and shackles
2 Keeper and 2 Reese tow power 10000 lbs Tow hooks
Sea Craft heat vents
Smittybilt XRC 8000lbs winch
Rokmen weld-in shackles mounts and shackles
2 Keeper and 2 Reese tow power 10000 lbs Tow hooks
Sea Craft heat vents
In progress
Set of PIAA Super White driving lights (Top of winch mount)
Underbody rock lights
Maybe header wrap
Rear End
Underbody rock lights
Maybe header wrap
Rear End
Custom tube bumper with taillight bars
Reese Class 3 Hitch
In hitch drop tire carrier with cb antenna
Rokmen weld-in shackles mounts and shackles
2 Reese tow power 10000 lbs Tow hooks
Reese Class 3 Hitch
In hitch drop tire carrier with cb antenna
Rokmen weld-in shackles mounts and shackles
2 Reese tow power 10000 lbs Tow hooks
In Progress
Full steel gas tank skid
Custom upper shock mounts
Underbody Rock Lights
Sides
Custom upper shock mounts
Underbody Rock Lights
Sides
Custom Diamond Plate Rockers
Bushwacker Cutout Flares
Custom Steel Diamond quarter Protectors
Bushwacker Cutout Flares
Custom Steel Diamond quarter Protectors
In Progress
Full wheel to wheel rocksliders
Underbody Rock lights
Underbody Rock lights
Roof
Custom Full Roof Rack
Custom mounts
Hi lift mount
Full top cargo net
In progress
Front 4 Fog Lamps 65W bulbs
Sides Flood Lamps
Rear custom Upper Rack LED Stop & Turn Bars
Reverse Lamps
Custom mounts
Hi lift mount
Full top cargo net
In progress
Front 4 Fog Lamps 65W bulbs
Sides Flood Lamps
Rear custom Upper Rack LED Stop & Turn Bars
Reverse Lamps
Also in progress is
Ruff Stuff Uni Body Stiffeners
Custom belly skid
Custom belly skid
The Gut
Mostly stock stuff but the 12v plugs gauges switches cargo lights CB radio and head deck
Want to make tool boxes and supply locations
Drive train stuff
K&n filter magnaflow exhaust accel coil yellow top battery 125amp big alternator 4g wire front mount transmission cooler
there could be more. I just dont remember as of now
Last edited by gobbs_stopper; 08-17-2012 at 08:45 PM.
08-18-2012, 01:11 PM
#4
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Trending Topics
08-20-2012, 07:57 AM
#8
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
08-21-2012, 05:26 PM
#9
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Well i found alot of new things i have to fix. I have alot of body work to do and unibody cleaning and protecting the medal
10-01-2012, 08:49 PM
#13
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
10-06-2012, 09:18 PM
#14
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Started my stiffiners and belly pan and rocksliders
The broken and bent crossmember
The stiffiner
The broken and bent crossmember
The stiffiner
11-11-2012, 12:41 PM
#15
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L