ok will do. i may make a roof rack eventually if i ever get bored and have nothing else to do but for now their just going on the stock roof rack cross bars

 

Go to your favorite yard, pull a part, and just get two more roof rack cross bars and slide them on. They are east to remove and still. You know you can use more than two up there right??

 

yea i know but im kinda tired of the spare bein up there anyways i might take all the cross bars off except for the one that ima use for the lightbar

 

hey man i just notcied that you was from louisiana you ever go on the la4x4 site im also on there as itsajeepthang would be nice to get another xj to ride with i have 4 of them in my yard 2 are mine 1 is my twins and 1 is for a buddy....

 

i have those same lights... mounted the same way. kc 150w dayligters! just becareful.. if one blows you can't get the bulbs from KC anymore. you have to buy the new halogen thing and they only come in 130w and u have to get a new silver peice

 

here's what it looks like. think it would look cool if i had a 5th one in the middle bnecause they all sit at diffrent hights because of the bar. im just worried about the weight of them... making the bar come out of the slider things because of drag going down the road.

 

The bar will not come out. I had 4 on the stock one. At night it will appear the light beam bounces and will lead you to believe the bar is flexing. The bar does not flex, however where the bar attaches to the plastic sliders there is some play. I'd recommend fabbing up some steel band clamps and tighten em over the two like I did (sorry I do not have pics) and you could whip donuts and hit jumps at 50+ and that thing wont move an inch.

 

tight yea i have a few friends with xjs but ive never heard of that site ill check it out

 

nice. you think you can send me a diagram of how you wired them are just explain r sumthin cuz i wired them up today and they worked if i bypassed the switch but if i run through the switch it gets real hot like the wires are shorting r sumthin

 

What gets hot. Wires, switch, both?

 

what switch? did you use the relays?

 

no i bought them from a friend and all it had was the wires. what all do i need? i went buy a switch and a inline fuse

 

the wires get hot

 

heres what it looks like with the lights mounted. just needa figure out the wiring now;'

 

ok. u need relays. i still don't know what switch your by passing. all i have is a wire running from my battery into the cab then split off by some weird looking metal box that runs 2 diffrent hot wires to 2 diffrnt relays then from the relays i have a ground and wires running from the relays to the lights.. i have 2 lights on one switch.