The "BUMBLE" build. Project slow go.
Thread Starter
Senior Member
Joined: Nov 2009
Posts: 834
Likes: 0
From: Delaware county PA
Year: 1998
Model: Cherokee
Engine: 4.0L
Front fenders finally trimmed 8)

Black line was original plan, yellow new plan.


Figured wile I was at it mine as well trim that little bit under the flair bracket for extra room on the trail when flairs are off.






Scrap

Still want to trim more but this will do for now. Trimming the back tomorrow.

Black line was original plan, yellow new plan.


Figured wile I was at it mine as well trim that little bit under the flair bracket for extra room on the trail when flairs are off.






Scrap

Still want to trim more but this will do for now. Trimming the back tomorrow.
Thread Starter
Senior Member
Joined: Nov 2009
Posts: 834
Likes: 0
From: Delaware county PA
Year: 1998
Model: Cherokee
Engine: 4.0L
Someone hide my grinder. I was lookin today and im moving my washer bottle. Then using the top edge of the stock flair mount as a guide and cutting all that **** out front and back. :twisted: Then remounting the stock flares with two bolts each and wing nuts for easy trail removal.
4 ****ing cuts and i gain soooooo much room. I love my grinder
Grinders are really like tattoos, one cut and u just want more!! :yarr:
4 ****ing cuts and i gain soooooo much room. I love my grinder
Grinders are really like tattoos, one cut and u just want more!! :yarr:
Love the build man, Can't wait till this snow melts and the creeks open up so I can go find some places to go fishing.
I know mine's older and a bit different, But I just took the flares off the front and used the dust line from them to cut the fenders. Make sure you hammer the pinch weld down on the inside of the fender, they like to cut into the tires.
I wish my jeep wasnt red, 'cause blue is better. haha. I had that as a sticker in my younger days.
I know mine's older and a bit different, But I just took the flares off the front and used the dust line from them to cut the fenders. Make sure you hammer the pinch weld down on the inside of the fender, they like to cut into the tires.
I wish my jeep wasnt red, 'cause blue is better. haha. I had that as a sticker in my younger days.
Thread Starter
Senior Member
Joined: Nov 2009
Posts: 834
Likes: 0
From: Delaware county PA
Year: 1998
Model: Cherokee
Engine: 4.0L
Well haven't updated my thread lately or done any exciting work.
So hears some camping pix from this weekend at knoebels.
Packed and ready to rock...


Setup...

Jfc!

So hears some camping pix from this weekend at knoebels.

Packed and ready to rock...


Setup...

Jfc!

Thread Starter
Senior Member
Joined: Nov 2009
Posts: 834
Likes: 0
From: Delaware county PA
Year: 1998
Model: Cherokee
Engine: 4.0L
Damn tree


the boy...


Pbr, some ipa and **** creek made for nice nights

Ready to roll home

with FILs 150 platinum

XJ still turns more heads.
Headed home in the rain..


the boy...


Pbr, some ipa and **** creek made for nice nights


Ready to roll home

with FILs 150 platinum

XJ still turns more heads.
Headed home in the rain..
Junior Member
Joined: Apr 2011
Posts: 43
Likes: 0
From: Mobile, AL
Year: 1990
Model: Cherokee
Engine: 4.0 i6
Thread Starter
Senior Member
Joined: Nov 2009
Posts: 834
Likes: 0
From: Delaware county PA
Year: 1998
Model: Cherokee
Engine: 4.0L
Shiny


First impression, im happy with them. Haven't done a lot of driving but so far it seems to be stopping better. Time will tell if it was worth the money.


First impression, im happy with them. Haven't done a lot of driving but so far it seems to be stopping better. Time will tell if it was worth the money.









