Seasoned Member
Quote:
Ive heard that you can get 1.5" pipe and bend it in the pipe bender, then cut it in half (length wise, along the curve of the die) and weld it into the die. Since the I.D. of the pipe is 1.5", and the O.D. of the tube is 1.5", tube should fit nice and snug in the modified pipe die.Originally Posted by builtnotbought89'
I've been told I might be able to fit 1.5" .120 wall DOM in my 175" die I plan on taking the die to the steel yard to fit it before I buy!
You would be cutting a piece of tube like this http://farm5.static.flickr.com/4065/...e0d7c1db_o.jpg and welding it into the die.
Make sense?
Seasoned Member
them some nice photog's.
So your really convinced on the chop huh? A stretch but no chop would get my vote.
So your really convinced on the chop huh? A stretch but no chop would get my vote.
Ya pretty set in my ways as far as the chop goes... That is if I ever get money to start it, & the axle swap!
Seasoned Member
i really like the cup holders, now im gonna go surchin in salvage again hahah, nice build mud flap thing is dece also
Well it been way too long since I've upgraded anything on the Red Rock Monster! And I've been thinking about the D44/9" swap, but I've seen first hand that that setup is more headaches than is worth! SOOOO...
Just put in an order for F&R USA 4.56 gears, Yukon alloy 8.25 shafts, & will be putting in an order for the 8.25's Aussie locker tomorrow!
Also lookin at some used 33x12.5x15 Mickey Thompsons
Links;
http://www.jeepinoutfitters.com/scri...idproduct=1270
http://www.jeepinoutfitters.com/scri...idproduct=1307
http://www.jeepinoutfitters.com/scri...idproduct=1272
http://www.knowwhere2jeep.com/aussie..._store=default
Has anyone heard about the back orders on the Aussie for the 8.25????
Guess I better get to the JY & find an 8.25... haha
Just put in an order for F&R USA 4.56 gears, Yukon alloy 8.25 shafts, & will be putting in an order for the 8.25's Aussie locker tomorrow!
Also lookin at some used 33x12.5x15 Mickey Thompsons
Links;
http://www.jeepinoutfitters.com/scri...idproduct=1270
http://www.jeepinoutfitters.com/scri...idproduct=1307
http://www.jeepinoutfitters.com/scri...idproduct=1272
http://www.knowwhere2jeep.com/aussie..._store=default
Has anyone heard about the back orders on the Aussie for the 8.25????
Guess I better get to the JY & find an 8.25... haha
Found my tires!!! They are a set of 5 wrangler MTRs 35x12.5r15 for $450 on ksl.com classifieds! I checked them out today, & they are gonna look SICK! 
I tried to talk him down on the beadlocks, but he held firm at $900 (wheels & tires)
I tried to talk him down on the beadlocks, but he held firm at $900 (wheels & tires)
So I had to play hooky from work today, but I pulled my 8.25 29 spline out of a '01 XJ at the JY for $130! 
Also picked up a intake outta a neon (guess what I was looking for) paid $5 for it!
Also picked up a intake outta a neon (guess what I was looking for) paid $5 for it!
CF Veteran
Quote:
Attachment 39413
Also picked this outta a neon (guess what I was looking for) paid $5 for it!
Attachment 39414
Which JY?? I know there was a green colored late model at pull n save last week. I stole the carpet out of it. Originally Posted by builtnotbought89'
So I had to play hooky from work today, but I pulled my 8.25 29 spline out of a '01 XJ at the JY for $130!Attachment 39413
Also picked this outta a neon (guess what I was looking for) paid $5 for it!
Attachment 39414
