BarrelMakers Build
#151
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I'm staying with my toyo open country at's that are on there.
I don't even have a full sized spare yet, but eventually ill buy a set of 5 of something.
Probably toyo open country mt's in a 33x12.5 flavor.
I don't even have a full sized spare yet, but eventually ill buy a set of 5 of something.
Probably toyo open country mt's in a 33x12.5 flavor.
#152
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Started on the front axle Saturday.
Got the knuckles mounted up.
Painted parts, silver for arms and diff covers.
Still need to paint the tie rod, draglink, and trac bar silver.
Hopefully my boss will give me the ok to work on my Jeep in the parking lot so I can use company welder and stuff.
Looking forward to getting this thing together soonish.
Got the knuckles mounted up.
Painted parts, silver for arms and diff covers.
Still need to paint the tie rod, draglink, and trac bar silver.
Hopefully my boss will give me the ok to work on my Jeep in the parking lot so I can use company welder and stuff.
Looking forward to getting this thing together soonish.
#154
Senior Member
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Rustolum rust reformer! No need to clean her up! Run a wire wheel over it all to scratch it a bit and she's good! Lol that's what I did for mine. Covers great. And if ya scratch it....pishhhht fixed.
#155
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
With the help of 616_95xj I was able to get the long arm crossmember bolted on, after a few slight modifications.
Replaced the trans mount with a poly from daystar, ended up lifting the t-case up a lot.
Replaced motor mounts with the poly Brown dogs.
Install of the brown dogs wasn't too bad, struggled more with getting the crossmember together than anything.
Overall feeling great about things pecking away at it.
No pictures of the crossmember right now because it wouldn't be justified without the arms.
Replaced the trans mount with a poly from daystar, ended up lifting the t-case up a lot.
Replaced motor mounts with the poly Brown dogs.
Install of the brown dogs wasn't too bad, struggled more with getting the crossmember together than anything.
Overall feeling great about things pecking away at it.
No pictures of the crossmember right now because it wouldn't be justified without the arms.
#158
Senior Member
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
#159
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
It's the drive shaft.
When I neutral the engine feels great.
Just really bad vibes from the shaft.
Time to get on that sye.
When I neutral the engine feels great.
Just really bad vibes from the shaft.
Time to get on that sye.
#160
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
#164
CF Veteran
Thread Starter
Join Date: Mar 2012
Location: Holland MI
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
8.8 is working great.
Got my 5-760x u joints in, going to install with full circle clips when I get some clips.
I need to order another drive flange for the 8.8 because I want a spare.
Still need to get my rear shocks dialed in but I want to install the new ome stuff first, which means I need the front axle in at the same time.
Got my 5-760x u joints in, going to install with full circle clips when I get some clips.
I need to order another drive flange for the 8.8 because I want a spare.
Still need to get my rear shocks dialed in but I want to install the new ome stuff first, which means I need the front axle in at the same time.