i think thats what it is because my dad works for weatherford.

their are a few holes in the gas tank, me and my dad were thinking maybe apoxy, becauase we dont think the gas tank off the zj would work since its 3 gallons bigger. need help!!

I'm not positive, but it should work. I know for a fact that the only difference in the XJ gas tanks is the location of the vent tube. Basically the tanks have the same dimensions, but the 16 gallon tank's vent tube cuts it off at 16 gallons vs. the 20 gallon tank. The total capacity of these tanks is actually about 23-25 gallons depending on how well you modify the vent tube.

There's a write-up about it and a wealth of general XJ knowledge here: http://jeep-xj.info/HowtoFuelTank.htm

Alright thanks. We might try that.

Did my third brake light. And undercoated my bumper.

haha... that's cool... what did you use for the brake light?

I got mailbox letters and put them on there then I tinted it with vht nightshade and took the letters off. I'll get a pic tomorrow in the daylight

Here's a better pic

Just found out that I have an 8.25!!!!!

SWEET! Now you just gotta figure out if it has LSD, C-Clip or Non C-Clip, and what the spline count is... and of course the gear ratio - which will probably be 3.55

Well I know its a limited slip, I'm not sure about the c clip, I think the spline count is 29 if I'm not mistaken, maybe 27, and I believe they're 3.55s.

Its a 29 spline c clip 8.25 all 8.25 are c clip

Yup... my bad... I was thinkin' of the D35 - those came in a non c version although rare and still crappy

thanks guys, i wish i could put the 3.73's outta my zj in my xj though..neither axles are the same. :[