how'd you get it?!?!?! that's a talent right there!

 

I was born this way... I have no explanation

 

plans as of now

dana 60 up front
ford 9" in rear
linked
frame reinforcement
top chop
cage
hydro assist
39" tires possibly


and uh yeah

 

parts jeep!!!

 

sold my dana 30 so the axle swap process starts

 

Why not a 44 up front and 9" rear? Any plans on going bigger in rear some day? Are u going to narrow the 60 front to match the 9" in rear? Also that looks like hell in the snow? Where u at? Here in co we have nothing :/

 

I might have got a good deal on a 79 ford with a 44 up front so i might be goin that route. Maybe just 37s. My plans change all the time

 

Haha yeah I hear ya there. The way I see it your real plans don't start till your doing the work. Cause once u have this or that whatever then u can decide what u really want. Unless u are mind set on something. Not me for sure my plans change too. But anyway good luck. Hopefully it's a hp44 and pretty cheap. Ill be following

 

a year and a half after i got my jeep i finally get the number one necessity

 

Awesome! Damn I wish I could get one bad!!

 

now i knew my parts jeep was a pos... but this surprised me


first off, when they trimmed the rear wheel well's they cut way past the pinch. and in the picture..... that's not a bungee cord, that's a bike lock. the 2 inch aluminum blocks were a nice touch, the lowest leaf in the pack on the passenger side was snapped completely in half haha

 

wow thats some high quality work right there on the parts jeep

 

yeah, i thought so too. everything is good that i need off it but ****!!!


got tearing into the parts jeep again, i just need to take the transfer case off it and then i can take it to the scrap yard.

i got a pair of these thingies ready to weld on but ill wait until i get the frame all plated before welding anything to it.

 

progress. moved the axle under the heep

 

Very Inspirational Build you have right here!