they are jcr's stage 3 sliders

 

i ran it for about 12 feet so i could get to a level place... i don't like the dents on my floor though. i probably would of tried running it out of where i was but i like the challenge of front wheel drive.

 

so i got a pile outside of a ton of new parts just laying around... a new gas tank, and new fuel pump assembly, sliders, dana 44 with 4.88 with spartan locker, new radiator, 4.88 gears for the front axle, flowmaster exhaust with new o2 sensor, and front bump stops. and i still need to grind the rust away on the floor boards and bed line the inside, and finish my quick door removal upgrade. FML i dont want to work on this jeep any more

 

welcome to my world lol, I just want to enjoy it... but thats not as fun anymore either LOL

 

nothin duct tape cant fix.

 

finally decided to mount these rusty things up. only got the first one done but some progress, i still need to take it off and paint it and put the bolts on the pinch seam... i couldn't see after drilling those holes, i had too much sweat in my eyes. jeeze i need some reece's

 

got it back from the shop with new gears and locker. i just painted it today, it's ready when i get a chance to go pick up the jeep from the shop where the dana 30 has been regeared without a locker for now.

 

Come out to lil moab this weekend.

 

i would of if i didn't have to do this

 

Looks like your almost done! get on it!

 

just need to bleed the brakes and she's good.. the dana 44 has a slightly longer pinion so my drive shaft doesn't need to be longer... centering an axle with tires on and a locker blows!! i put both tires on creepers haha

 

after driving it with 4.88 gears i really wish i would of done it sooner... it's soooooooooo nice!

 

Awesome! yeah gearing make a big difference, especially on the street. Sounds like it all good so you need to get out and test that locker!

 

took it out for a quick run with the locker. it crawled up stuff that i use to spin tire the whole way up

 

after my trip to moab i'll be getting a spartan in the d30