94 sons first rig
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
94 sons first rig
so i finally got around to starting on my sons cherokee. This will be his first rig next year when he starts driving. Until then its my toy.
It is a 94. i just got done rebuilding the motor, installing a rustys 3 inch lift i scored off craigslist for 125 with discos, 31x10.50r15 tires, a stereo, cut and folded the front fenders, and lift shackles in the rear, and a pair of bumpers i scored from ebay for 200 bucks to my door. still have to install the mustang intake, neon injectors, bored throttle body and spacer. then a full exhaust.
this forum has been very helpful with budget friendly upgrades.
starting the work on the suspension
front lift on
lift complete. but not high enough
so i bought these for the rear
apparently chevy lowering shakles make jeep lifting shackles
pre shackle lift
post shackle lift, a little over 2 inch gain
and the front fender fold
now we take it out tomorrow for its first 4x4 trip.
It is a 94. i just got done rebuilding the motor, installing a rustys 3 inch lift i scored off craigslist for 125 with discos, 31x10.50r15 tires, a stereo, cut and folded the front fenders, and lift shackles in the rear, and a pair of bumpers i scored from ebay for 200 bucks to my door. still have to install the mustang intake, neon injectors, bored throttle body and spacer. then a full exhaust.
this forum has been very helpful with budget friendly upgrades.
starting the work on the suspension
front lift on
lift complete. but not high enough
so i bought these for the rear
apparently chevy lowering shakles make jeep lifting shackles
pre shackle lift
post shackle lift, a little over 2 inch gain
and the front fender fold
now we take it out tomorrow for its first 4x4 trip.
#2
CF Veteran
Join Date: Nov 2011
Location: Las Vegas, NV - St. George, UT
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Were the shackles a direct fit? I have a set of McGaughy drop shackles from my last truck but I thought there was some modification needed for the fit.
#4
Junior Member
Thread Starter
Join Date: Jul 2011
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
i had to grind down the steel insert on the bushing end about a 1/16th of an inch on both sides.
ill let ya know on the throttle body and injectors. i have the injectors already. waiting for throtle body
ill let ya know on the throttle body and injectors. i have the injectors already. waiting for throtle body
Thread
Thread Starter
Forum
Replies
Last Post
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-02-2015 02:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)