3" lift problem
#1
Member
Thread Starter
Join Date: Apr 2013
Location: Cincinnati Ohio
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: V6
3" lift problem
So I got the leafs on all good 3 to 4" in the back .
Thin I started the coils , I got one side done and I noticed I didn't get the lift I was expecting 1" over stock . Granted I don't have the other side and that may have something to do with it I hope.
Ill do the other side and post pics in a little wile . Hopefully it will lift if not i need some ideas on what I can do to even it out
Thin I started the coils , I got one side done and I noticed I didn't get the lift I was expecting 1" over stock . Granted I don't have the other side and that may have something to do with it I hope.
Ill do the other side and post pics in a little wile . Hopefully it will lift if not i need some ideas on what I can do to even it out
#7
Senior Member
Join Date: Feb 2013
Location: Alpharetta, GA
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Wow, that is a big difference. I thought you were saying the entire fron was level, but lower than the back. I'm gonna go with the notion that that's a coil issue. either 2 different coils, or 1 of them is bad.
Trending Topics
#12
Member
Thread Starter
Join Date: Apr 2013
Location: Cincinnati Ohio
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: V6
Ok odd thing I drove it up the street and parked it and now it's only .5" off right to left wheel
20" from center hub to wheel flare in the back and 19" in the front
I still need to bring the front up 1"
20" from center hub to wheel flare in the back and 19" in the front
I still need to bring the front up 1"
#14
CF Veteran
Join Date: Dec 2010
Location: Missouri
Posts: 1,246
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Yeah I don't buy used springs anymore because the same thing happened to me. Sometimes the passenger springs sag a little more due to engine torque or something and you probably put the same spring that they used on the passenger side on your passenger side. Or they may have given you the wrong sized spring.