Originally Posted by chrisquested
(Post 2707196)
so I tore all my interior out today cause I had nothing else to do on the jeep! pics are in beginning of thread
I also ordered the following! Re 5.5" coil springs Re 3.5" leaf springs Dirt bound light bar mount 40" led light bar Ironrockoffroad 88 swap with truss bilstien shocks ford 8.8 companion flange long arms speakers for sound bar led bulbs for dash Still thinking about ordering delta head lights one of my favorite mods is the putco h4 harness/hella e code housings/sylvania sylver star ultra h4 bulbs. i drive a lot an night so those wimpy stock head lights werent gonna hack it. whered you get the light bar? im thinkin about pickin one up soon |
I found a lot of really cheap ones on dhgate.com but ended up going with a double row 40" led spot/flood combo from amazon
I should be getting most this stuff next week so I will put what I can on, the. Drop my axle off to get gears installed |
Originally Posted by chrisquested
(Post 2707406)
I found a lot of really cheap ones on dhgate.com but ended up going with a double row 40" led spot/flood combo from amazon
I should be getting most this stuff next week so I will put what I can on, the. Drop my axle off to get gears installed |
Yea I am going 4:88, chromoly front shafts, and 8.8 with disc brakes right away
|
Originally Posted by chrisquested
(Post 2707804)
Yea I am going 4:88, chromoly front shafts, and 8.8 with disc brakes right away
|
Originally Posted by cleenrob
(Post 2707831)
Can't wait to see this thing put together
|
Got my bfg km2 today paid $800 for 5 rims and 5 tires!!!
pics are added to the begining |
Where did you order your gears, master kits and shafts from
|
Originally Posted by chrisquested
(Post 2703351)
This is for parts as I receive new things!
35/12.50/R15 BFG KM2! http://i922.photobucket.com/albums/a...pshyzfbtxt.jpg |
Originally Posted by cleenrob
(Post 2710649)
whered you score those from?
|
Originally Posted by chrisquested
(Post 2707266)
Yea we was talking about doing that not sure what to get though or how much I need.
Fatmat is a lot of cheaper and people seem pretty happy with it. If I could have obtained a sample of it, I might have bought it instead of the Stinger. The Stinger product is excellent though. Also, it took me 20 hours or so to do the install. I could have saved some time by not putting aluminum tape over the exposed edges or stuffing this crap into the insides of the doors. Basically, the detail work added a lot of time. |
Originally Posted by Snajo
(Post 2710835)
Three boxes of Stinger Roadkill at 36 Sq Feet each will take care of the roof, floor, doors, and hatch. Use scraps for the rear fender wells or a sheet or two from a fourth box. I'm going to use the leftovers from my fourth box to do the hood.
Fatmat is a lot of cheaper and people seem pretty happy with it. If I could have obtained a sample of it, I might have bought it instead of the Stinger. The Stinger product is excellent though. Also, it took me 20 hours or so to do the install. I could have saved some time by not putting aluminum tape over the exposed edges or stuffing this crap into the insides of the doors. Basically, the detail work added a lot of time. http://www.amazon.com/Stinger-RKX36B.../dp/B001HHP59G Wow don't really want to pay $300 for that?!?! is there any cheaper stuff? |
dang had quite a bit of boxes today when I got home!
Shocks, long arms, companion flange, Re coil springs, Re leaf springs! Pics added to beginning. |
Ill have long arms eventually.
|
Originally Posted by cleenrob
(Post 2711801)
Ill have long arms eventually.
Now I think I will focus on getting the jeep nicer while my axles get put together, I ordered my chromoly shafts today but I still need new hubs, brakes, alloy axle tube seals, and my steering. |
All times are GMT -5. The time now is 09:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands