Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Jeep Builds (https://www.cherokeeforum.com/f46/)
-   -   2001 Xj built to last ! Beast mode build! (https://www.cherokeeforum.com/f46/2001-xj-built-last-beast-mode-build-184496/)

chrisquested 12-11-2013 09:34 AM

2001 Xj built to last ! Beast mode build!
 
1 Attachment(s)
Ok so I picked up this 2001 jeep Cherokee Xj it has a 4.0L engine/auto trans/np231.

I paid $1800 for it because it had a broken lower control arms and I drove it home, every time I hit the brakes the tire would ride up into the fender. So since it's a low pinion dana 30 I decided to swap it out with a high pinion dana 30. Now the chrystler 8.25 is a decent axle but I picked up a ford 8.8 from a 2000 ford explorer at the junk yard.

This jeep will be built to handle rough off road, rocks, mud, water crossing, trail rides, beach riding, and long trips.

So here is the list of thing I am starting to order:

Suspention components:
5.5" rubicon exspress coil springs/ORDERED
3.5" rubicon exspress leaf springs/ORDERED
Seriousoffroad 1 ton utk steering
Rough country adjustable trac bar/ORDERED
Bilstien shocks/ORDERED
Shackle relocation brackets/ORDERED
Ironrockoffroad long arms/ORDERED

Axle components:
Ironrockoffroad Dana 30 truss
Ironrockoffroad ford 8.8 truss/swap kit/ORDERED
4:88 gears front and rear with master rebuild kits/ORDERED
Chromoly shafts front and rear
Lock right locker for dana 30/ORDERED

Interior upgrades:
Replace headliner
Clean carpet and seats/REMOVED
Upgrade sound system/ORDERED

Exterior upgrades:
Winch bumper
8500Lb winch
Fender flares
Rock sliders

Engine/performance:
Injectors
Bored throttle body
Header
Exhaust
Intake

Tires/Rims:
35/12.50/R15 BFG KM2a
For rims I have not decided and this could easily change if I find a better deal some where else.

So like stated above I want a nice, clean, reliable jeep this time.

My 1st jeep was a 97 very clean, but was small and open diffs didn't go far.
My 2nd jeep was a 91 was ugly, beat up, but had most stuff listed above.
I have also had a few other jeeps and I found flaws with them, so this time I bought a 2001 and I will be making it into what I want.

So this is what I am starting with
Attachment 331747

chrisquested 12-11-2013 09:34 AM

3 Attachment(s)
So took tires off and put it on jack stands I will start removing the suspension and axles soon.
Attachment 331744





Attachment 331745
Dana 30 is wire brushed, primed, painted!
Attachment 331746

chrisquested 12-11-2013 09:35 AM

3 Attachment(s)
so I got bored and did this today
Attachment 331741
Attachment 331742
Not so pretty?
Attachment 331743

chrisquested 12-11-2013 09:35 AM

6 Attachment(s)
This is for parts as I receive new things!

35/12.50/R15 BFG KM2!
Attachment 331735
Got this stuff in today 12/18/13


Attachment 331736
Got this stuff in today 12/19/13

Attachment 331737So this is my roof rack and truss
Attachment 331738
Speakers
Attachment 331739
Chromoly shafts
Attachment 331740

chrisquested 12-11-2013 09:35 AM

One more reserved just incase

Atmos 12-11-2013 10:50 AM

that's a big fancy parts list you've got there. plenty of fat could be trimmed out of there
for instance, no need for an 8.8 truss. save yourself $70 http://www.ruffstuffspecialties.com/...g/88ss-31.html

nice start to the build though. what all have you already ordered? oh and the words "built to last" should be immediately followed by frame stiffeners and bracing :thumbup1:

speedballin 12-11-2013 12:14 PM

looks good man, im a huge fan of those rims they look much better then mine lolol

subb'd for sure

chrisquested 12-11-2013 05:15 PM

all advice is welcomed!

cleenrob 12-12-2013 11:34 PM

sub'ed we'll have to wheel one of these days :D

chrisquested 12-13-2013 01:45 PM

Yea for sure I am ordering parts all day today so should get this jeep up in the air here within next couple weeks for sure


Also does anyone know what bump stops are good for 5,5" lift and 35s

cleenrob 12-13-2013 06:06 PM


Originally Posted by chrisquested (Post 2705980)
Yea for sure I am ordering parts all day today so should get this jeep up in the air here within next couple weeks for sure

Also does anyone know what bump stops are good for 5,5" lift and 35s

Jack up a wheel to full stuff and measure.

chrisquested 12-13-2013 06:37 PM


Originally Posted by cleenrob (Post 2706263)
Jack up a wheel to full stuff and measure.


ok will do!!

chrisquested 12-14-2013 07:22 PM

so I tore all my interior out today cause I had nothing else to do on the jeep! pics are in beginning of thread


I also ordered the following!

Re 5.5" coil springs
Re 3.5" leaf springs
Dirt bound light bar mount
40" led light bar
Ironrockoffroad 88 swap with truss
bilstien shocks
ford 8.8 companion flange
long arms
speakers for sound bar
led bulbs for dash

Still thinking about ordering delta head lights

gettin_dirty_with_ruby 12-14-2013 07:56 PM

While the carpet is out, have Carlos install sound deadening on the floor and everywhere he can get it to fit. You'll appreciate it once the sound system is installed and you can hear the music instead the whine of the 35's

chrisquested 12-14-2013 08:25 PM

Yea we was talking about doing that not sure what to get though or how much I need.


All times are GMT -5. The time now is 11:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands