2001 Jeep XJ (The Tank)
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
2001 Jeep XJ (The Tank)
About
2001 Jeep XJ, Completely Stock. Picked it up two years ago for $900. Had around 155,xxx. Good Minimal rust. Guy used it for deer hunting and that's it. I'm the second owner.
Modifications done up to date
2001 Jeep XJ, Completely Stock. Picked it up two years ago for $900. Had around 155,xxx. Good Minimal rust. Guy used it for deer hunting and that's it. I'm the second owner.
Modifications done up to date
- Rebuilt Engine & transmission
- Replaced Dash lights Blue
- Cut Most Rust and welded new sheet metal.
- Catalytic Converter
- Flowmaster Super 44
- Aftermarket Speakers & Subwoofer
- Smoked tail lights & Turn Signals
- Paint the Whole car & Sub-frame with bed-liner
- Install 4.5" Rough Country Lift
- Install Rear Leaf Springs
- Add External Led Bars
- Install Snow tires
- Oracle Headlights
- Update All Exterior Lights to HID
- Weld Up a Custom Front/Back Bumper
Last edited by pimpinr; 07-15-2016 at 09:55 AM.
#3
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Thanks @RSWiser,
So all day yesterday and today i spent sanding the whole jeep with 80grit. Here are a few pictures.
I Also received my 4.5" Rough Country Lift. My Cat was waiting for it as anxious as me.
I Will be installing My lift tomorrow and patch some rust up!
So all day yesterday and today i spent sanding the whole jeep with 80grit. Here are a few pictures.
I Also received my 4.5" Rough Country Lift. My Cat was waiting for it as anxious as me.
I Will be installing My lift tomorrow and patch some rust up!
#5
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Removed more rust and patched the rear corner bumper frame. Busy day.
After sanding and slapping bondo on some spots I replaced almost the whole suspension.
Out with the old
In with the new
After sanding and slapping bondo on some spots I replaced almost the whole suspension.
Out with the old
In with the new
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Got the rust on the rear Axle and the rust on the rear bracket bumper today. Installing my leaf sprigs tomorrow with my rear shocks.
#10
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Been extremely busy but i painted my whole jeep this past weekend.
Enough of the talk, here are more pictures.
Enough of the talk, here are more pictures.
#12
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
I'm waiting for some misc Screws, U-Clips, etc..
In the meanwhile a Front end pic..
I have also Updated my To do list..
In the meanwhile a Front end pic..
I have also Updated my To do list..
#13
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
It's been a few weeks since I've updated. I ordered new LED Headlights for the jeep and painted the grill assembly and headlight housing...
Here are my new TEMPORARY headlights.. (I set my eyes on some real Halos)
Here are my new TEMPORARY headlights.. (I set my eyes on some real Halos)
Last edited by pimpinr; 07-26-2016 at 07:56 PM.
#14
Junior Member
Thread Starter
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Got a little more done to the jeep. Smoked new taillights, swapped a few goodies. Still waiting on tons of parts to be delivered.