2000 jeep xj sport. Frame work
#1
Seasoned Member
Thread Starter
Join Date: Feb 2011
Location: buffalo, ny
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
2000 jeep xj sport. Frame work
just posting this to see if im going in the right path on fixin this problem, frame is ripped in half. im gonna post start to finish....
#6
Member
Join Date: Feb 2010
Location: Orlando, FL and Lufkin, Texas
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: I6
Many will say what your doing is stupid and not worth it, but your learning and fixing something it will give you more ownership in it. I do say It might be a good time to look into plating the whole subframe. Get something from HD or someone else. Plate all the way from the rear bumper to the front bumper.
#7
Seasoned Member
Thread Starter
Join Date: Feb 2011
Location: buffalo, ny
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
the only rotte on it is where im fixing the frame and the rocker. but im gonna cut out the rockers and build sliders
Trending Topics
#13
CF Veteran
#14
CF Veteran
You know after studying the picture it looks like it's been hit and repaired at one point before.
Maybe somebody pulled it out on a frame machine and used a torch to soften the metal during the repair and did not do a very good job sealing it from rusting.
Thats a body shop hack job my friend.
Maybe somebody pulled it out on a frame machine and used a torch to soften the metal during the repair and did not do a very good job sealing it from rusting.
Thats a body shop hack job my friend.
#15
Seasoned Member
Thread Starter
Join Date: Feb 2011
Location: buffalo, ny
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
i think so also, that could be the reason the trailer hitch ripped out and thats why im at the point.. hope all goes well, cuz im itchin to hit the trails and some mud