2000 2 door build
01-22-2013, 11:49 AM
#19
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
Here's a better picture of the black hood, the paint turned out less glossy then I had expected which was good because the matte black really contrasts with my sparkly blue jeep
03-03-2013, 03:07 AM
#21
No, I don't lick fish.
Intersting build man, there's all kinds of suggestions on how to mod your jeep... first place I would look would be the Homebrew mods thread ( https://www.cherokeeforum.com/f58/ne...thread-130034/ )
some pretty good stuff in there
some pretty good stuff in there
03-03-2013, 08:53 AM
#23
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
well, theres been no major updates on the build lately except that I was cut off while driving they got what was coming to them. Rear ended them and ruined thier car... jeep was fine (fine being a broken blinker and a scrath on the fender) but no one was hurt and I was pissed.
03-03-2013, 08:54 AM
#24
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
Soon i will be re doing my rear bumper. and welding on some d-ring tabs to my front bumper. The rear bumper has a little play in it with my current jimmy rigged design.
Dont worry my new design isnt going to budge. at. all..
Dont worry my new design isnt going to budge. at. all..
03-03-2013, 03:26 PM
#25
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
started work on the D-ring tabs for the front bumper. As for the rear bumper i looked in my scrap pile and didnt have the metal i needed. Guess the rear will have to wait a little while longer....
Pictures of the D-rings coming soon.
Pictures of the D-rings coming soon.
03-03-2013, 03:57 PM
#26
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
here is what i have so far, Also since i had my bumper off i though i would clean some rust forming along my frame rails and re-paint my bumper.
03-03-2013, 04:03 PM
#27
CF Veteran
Join Date: Jul 2009
Location: New Jersey
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: l6 HO
Looking good buddy I've always liked the 2 door 5spds. That is a ton of money for those rims you got though!
I say trim your front fenders and cut/fold the rears next!
If you want to paint more of your jeep next time use plasti dip! You can peel it off down the road should it become damaged or of your just over the look.
I say trim your front fenders and cut/fold the rears next!
If you want to paint more of your jeep next time use plasti dip! You can peel it off down the road should it become damaged or of your just over the look.
03-03-2013, 05:13 PM
#29
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
So here is what i have so far. The only problem i have so far is my D-links are 3/4" and the biggest drill bit i have is only 1/2".... so gunna have to go buy a bigger drill bit or see if i know anyone who has one.
03-03-2013, 05:17 PM
#30
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
Freind showed up looking for my haines repair manual. Snapped i quick pic of his rig. Looking good minus the stock suspension hahaha