1996 XJ Country expedition DD
11-19-2015, 11:00 PM
#16
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
i figured i would update some. finally got the rubicon express 3.5 lift on along with a 2 inch spacer to level it with the shackle relocator kit. ordered a set of mamba wheels and 32 x 11.50 r15 cooper discoverer stt pro tires. also the stock radiator cracked so went with champion 3 row all aluminum with new has hoses
12-31-2015, 04:35 AM
#17
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
intakes done for now along with the brakelines. had to cut and reflare my hardline with new nuts. flaring tubes by hand is a pain with a cheap double flare tool.
02-13-2016, 04:17 AM
#18
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
well finally got the sway bar disco stow bars on and installed the snorkel and opt7 led headlight bulbs.ordered new bilstien 5125 all around,iron rock offload trac bar,6.5 coils for the front and control arm drop brackets. should line everything up properly so i can install two new front tires.always get the adjustable trac bar and alignment on jeeps. shredded two tires in 7k miles . lesson learned. also ordered a new speedo gear to correct the speedometer.changed both o2 sensors also.
02-13-2016, 11:35 PM
#21
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
the cupholders are just amazon 14 dollars.stock mopar part. the hanging one was 5 from walmart to hold bottles or my phone. thanks bumpers have been ordered can't wait to update again
02-18-2016, 08:17 PM
#22
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
no its some amazon $80 cree led lighter.it works great but did get condensation in it after 2 years in florida. i sealed with clear rtv when i installed it. still works great though. the headlight bulbs are opt7 as well as the lightbar harness. they sell quality parts and fast shipping.snorkel i decided to get a solid piece for the throttle body.hits the hit a tad now but still closes an works great.recieved my or fab rear bumper but my front bumper won't be here for a few weeks so i might cancel and look for another front winch bumper.also my new bilstein shocks, iron rock offroad trac bar and 6.5 inch coils were finally shipped
02-20-2016, 04:18 AM
#25
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
02-27-2016, 05:57 AM
#28
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
installed 6.5 coils in the front with bilstien 5125s(still need to do the rear).cntrol arm drop brackets. and iron rock off road adjustable track bar
took some persuasion
took some persuasion
02-27-2016, 06:48 AM
#29
Beach Bum
Lookin good!
Just one important detail, the drop brackets Must have the rear support installed. The only reason they are sold separately is for the Comanche. It's brackets are built differently.
Just one important detail, the drop brackets Must have the rear support installed. The only reason they are sold separately is for the Comanche. It's brackets are built differently.
02-27-2016, 06:52 AM
#30
Junior Member
Thread Starter
Join Date: Nov 2014
Location: fort walton beach fl
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.