1995 re-do
#1
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1995 re-do
Hopefully posting in the right spot about this. Have a 95 4.0 2wd 2 door. Starting a complete re-do. Pretty much making it new again, motor suspension, interior, tranny, paint all the above. Any thoughts of how I should go about doing this.
#3
Seasoned Member
Join Date: Nov 2016
Location: Idaho
Posts: 304
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1990
Engine: Renix 4.0
Acquiring thousands of dollars would probably be the first step. If you are going for oem parts it should be pretty simple. If you are looking to upgrade parts I would recommend doing a lot of research.
When it comes to aftermarket parts I usually try to figure out every available option. I take my budget, tolerances (needs), and reviews (feedback) into account when making a decision.
Most of the information you are after can be found by searching the cherokee forum.
When it comes to aftermarket parts I usually try to figure out every available option. I take my budget, tolerances (needs), and reviews (feedback) into account when making a decision.
Most of the information you are after can be found by searching the cherokee forum.
#4
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thanks craigjacob1, looking at some upgraded parts for sure. Especially on suspension. Defintly 3.5 good rideing liftRight now I have started the process. Removing the rear end to clean it up, change fluid. Clean underneath. Got the u bolts out. Removing drive shaft today, any pointers removing the lines that go to the drums to pull it out completely. Have not found really anything on it?