Hi all.
waiting to post some new pics!

Welcome man what's your info

Anyone have a air hammer I can come use for my sway var links

I'm pretty sure I got one in the garage. Lemme' know if you are gonna' be up in F'burg.

Rear Shackle bushings squeaking??? Any fix for this? I got a 6.5" Rough Country lift, and it's about 5 mos old. Rear bushings are starting to squeak. They do not have zirc fitting on them.

Seeing zirc'd ones, zirc'd bolts, and eurethane bushings... anyone suggest that one stands out over the other?

Thanks,
Barry

I perfer the zerk shackles over the zerk bolts. With the zerk shackles the zerk fitting is made into the shackle itself, and then the grease gets pushed into the bushing. I'd be afraid of the zerk bolt getting damaged when torquing it down and then not applying the grease correctly to the bushing. Poloyeurethane bushings are ok I guess but no way of keeping them greased.

Do u have a air compressor

Haahaa....

Yes. Works better with the compressor.

I will double check there is an air hammer out in the drawer where it should be. Haven't used it in forever.

Cool let me know and maby in the next few days would u want to help me pop out the sway bar pins and install my disco?

Ready to do some offroading again this season. Just where are those trails in Woodbridge area?

Peter

Hey, let me know when ya'll are doing the sway bar/disconnect install and where. I want to remove my stock disconnects and put in some homemade disconnects. The air hammer will come in nicely in getting the old ones out. I also have a cutoff wheel to offer to the effort.

Peter

Sure... I got impacts, cutting wheel,, compressor, etc.

Ping me.

Barry 540 duh 287 duh duh 2690 cellyphone

Im down sometime in the next week after my kit is done

Sweet man ill give u a call and we will work something out and grab the other guy and get his done at the same time and ill bring the beer just let me know what kind

Travis

Im thinking thursday

How hard is it to put extended brake lines on?