CF Veteran
Quote:
did u pull and clean the neutral sensor?Originally Posted by 95xjbawler
nothing and i tried it in N with nothing, then tried everyother gear for ****s and giggles. no result. and the starter tested good. doesnt even try
Newbie
getting ready to do that tomorrow, hoping for the best
here she is, figured its a girl jeep seeing as its already pms'ing with me
4.5 inch rustys lift
33 micky baja claws on champion.
snorket
aftermarket bumper
roof rack
need a front bumper tho
here she is, figured its a girl jeep seeing as its already pms'ing with me
4.5 inch rustys lift
33 micky baja claws on champion.
snorket
aftermarket bumper
roof rack
need a front bumper tho
CF Veteran
Quote:
here she is, figured its a girl jeep seeing as its already pms'ing with me
4.5 inch rustys lift
33 micky baja claws on champion.
snorket
aftermarket bumper
roof rack
need a front bumper tho
nice rig.Originally Posted by 95xjbawler
getting ready to do that tomorrow, hoping for the besthere she is, figured its a girl jeep seeing as its already pms'ing with me
4.5 inch rustys lift
33 micky baja claws on champion.
snorket
aftermarket bumper
roof rack
need a front bumper tho
its a pretty easy job, just watch u dont lose any of the teeny tiny parts, theres a few!
Newbie
yea she's a dirty little whor*,hope all goes well i would like to rip around the mountains for a few hours!!
Junior Member
Quote:
well if you're using a box end wrench that's why. Originally Posted by rtralabama
im stuck at getting the hub assembly off. the 12pt bolts will not budge, at all. i broke my 12pt socket on one of them and now it is rounded off like crazy. i tried to hammer a 6pt 1/2 on but i pops off when i put my ratchet on it and try to turn it
try a 1/2" drive 12 point socket, on a breaker bar.
then hammer it (bfh) out, hitting the socket, so you don't eff up the bolt any more.
hell you probably need an easy out or a RPG at this point.
CF Veteran
Quote:
try a 1/2" drive 12 point socket, on a breaker bar.
then hammer it (bfh) out, hitting the socket, so you don't eff up the bolt any more.
hell you probably need an easy out or a RPG at this point.
Originally Posted by deucestudios
well if you're using a box end wrench that's why. try a 1/2" drive 12 point socket, on a breaker bar.
then hammer it (bfh) out, hitting the socket, so you don't eff up the bolt any more.
hell you probably need an easy out or a RPG at this point.
i was using a 1/2 ratchet with a 12pt 13mm socket and it busted.
CF Veteran
Feeler post only
Would anyone be interested in a 4.5" lift with adjustable upper and lower control arm, uppers are brand new. Stainless brake lines, rustys coils and 4-4.5" rear leaf springs.
Pm me your contact info
Serious inquiries only
Would anyone be interested in a 4.5" lift with adjustable upper and lower control arm, uppers are brand new. Stainless brake lines, rustys coils and 4-4.5" rear leaf springs.
Pm me your contact info
Serious inquiries only
Member
Not to jack this thread, but didn't know where else to really put it as this is the PA thread.
A group of us have started a more localized club/group for the Lancaster county and surrounding area's. We are new and are just finalizing the logo and merchandise.
We are planning on doing off-roading weekends, scenic drives and some family oriented stuff as well so those with kids or wives who don't off road will enjoy as well. We also hope to attend jeep shows and charity events.
At the moment it is mostly Wranglers in the group as the group formed off Jeepforum.com but I own an XJ and would love to get more XJ's into the group.
If you're interested just drop me a line and I can give you more details!
A group of us have started a more localized club/group for the Lancaster county and surrounding area's. We are new and are just finalizing the logo and merchandise.
We are planning on doing off-roading weekends, scenic drives and some family oriented stuff as well so those with kids or wives who don't off road will enjoy as well. We also hope to attend jeep shows and charity events.
At the moment it is mostly Wranglers in the group as the group formed off Jeepforum.com but I own an XJ and would love to get more XJ's into the group.
If you're interested just drop me a line and I can give you more details!
Member
Quote:
We have a Facebook page for now, The group really took off much quicker than we expected and we are working towards getting merchandise first, including stickers, shirts, jackets and then maybe a website.Originally Posted by mdcmn7
I would be interested in some info, do,you guys have a website or Facebook page
Facebook page is: http://www.facebook.com/groups/210490965681922/
Senior Member
Anyone know of any Junkyards in the Pittsburgh are with a few decent 44s?
My 30 is pooping out and I want to get rid of the turfy five before I lift it and throw bigger tires on the 'ol Cherokee.
My 30 is pooping out and I want to get rid of the turfy five before I lift it and throw bigger tires on the 'ol Cherokee.
CF Veteran
What's up everyone? I've had my XJ for about 4 months now and after browsing the forum for all of my repair info so far I finally decided to register. I'm located in State College, PA (actually from about 15 miles outside of it), and it seems like all of the great old trails around here have been closed off. Anyone know of anything good in Centre County?
