Go from super manly yesterday to this today

 

Dafuq? Why are you putting your feet in the toilet with that blue cleanin water stuff?

 

Hoping someone with more car stereo know how can help me solve this.

I've got the system all connected. HU has rear left/right RCA which are run to a punch X 3 way crossover.



RCA are run into Input A and the selector switches are set for 1 in 3 out. The 3 out RCA are then fed to the corresponding inputs on the Amp.

The amps sub connection is this new style where it is ++ on one side and -- on the other. Currently the sub which is a SVC 4ohm is connected to ++ but I tried several other settings with no success.

So the problem is I'm only getting sound from the front and rear channel and not the sub. I haven't had much luck finding out config info online. Most say you need to change the sub setting on the HU but that isn't a option here. (i dont think)

pic of HU controls



Any advice would be much appreciated.

 

that is an old head unit....

 

Shouldn't you connect the sub to one + and one -? The HU should be sending full range and the crossover breaks up the signal. You have something wired incorrect. The HU doesn't matter.

 

I was going to say that there's his problem right there.

 

I told you I was going Vintage

I wired the sub +- first but no sound with that config a either. Even tried putting the sub on the B output, no luck there either.

 

It's at fancy nails getting a pedicure

 

90 amp stock, 136amp on the ZJ.

You will have to grind the mount bracket and a tiny bit on the timing cover.

 

Woohooo I got something right

 

Who has some used 3" coils and springs?

 

Aaron has coils

 

$50 scott

 

Tank is swapped. All I can smell is gas. That might just be me though. No leaks. She feels peppy too!

 

good to hear