Mark says he can't come this Friday?

 

I'm a member!!

 

They're not hard, just messy. I just did one in the parking lot last month. When you replace it, get that hard pipe that goes off to the left of your valve cover to your heater core tubing too.

 

Stupid **** is spinning with the nut

 

Propane torch and an impact gun

 

You plan on reusing this steering?

Need to spray it with pb blaster and try to seize the tre up somehow

 

Naw they seize up and just spin the tapered end, that won't do anythinb

 

I'm cutting the *****

 

sorry, cant do friday. Got a bithday party, then my friend is playing at bentz st. Bar, then side work in the morning. I can do Saturday. Chris is cool with it. I talked to him yesterday.

Sweet. You are officially an unofficial member!

 

Aaron get a pickle fork or a prybar, a torch, and an impact gun. Heat the ***** up red hot, have a buddy shove the pickle fork between the joint and the knuckle and try down while you hit it from above with the impact.

 

Whet! Aaron, try and grind a channel into the end I between the slots of the castle nut and try to hold it with a screwdriver an turn it with a wrench

If you heat it up, the grease does have a melting point around 500 or so. Don't touch it lol

 

Cool...Saturday it is......

 

Caturday!

 

Huh?

 

Cut the nut off....pretty sure its bent