Maryland Cherokee Club
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by Tattookid85
How can you be happy without my built axles?
Everything is ready to bolt in,. Dana 30 has heavy duty lower control arm mounts, c gussets welded to the c's, new ball joints, new u joints for axle shafts
Ford 8.8 has east coast gear supply swap kit, tubes welded to the center housing. Also both axles have new disk brakes
Originally Posted by Tattookid85
I have 35's with 15x8 wheels for $300, wheels are brand new
CF Veteran
Joined: Sep 2011
Posts: 2,454
Likes: 0
Sliders are gone, drive them to Maryland today and sold them
Seasoned Member
Joined: Jan 2013
Posts: 253
Likes: 0
From: Anne Arundel County, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
Sorry we didn't make the field trip today.. Got the trim out of the way and then had to knock down some honey do's. Will post up some pics of the new shoes later but my son is happy with it so I can relax.
My son in law Rob is one of the original bartenders at Duclaw so if you tell him his FIL Steve sent you it couldn't hurt.
The Hanson rear bumper gets here on Monday so I guess that's the next project. Spraying PB on those bolts like a wild man...
My son in law Rob is one of the original bartenders at Duclaw so if you tell him his FIL Steve sent you it couldn't hurt.
The Hanson rear bumper gets here on Monday so I guess that's the next project. Spraying PB on those bolts like a wild man...
CF Veteran
Joined: Sep 2011
Posts: 2,454
Likes: 0
Sorry we didn't make the field trip today.. Got the trim out of the way and then had to knock down some honey do's. Will post up some pics of the new shoes later but my son is happy with it so I can relax.
My son in law Rob is one of the original bartenders at Duclaw so if you tell him his FIL Steve sent you it couldn't hurt.
The Hanson rear bumper gets here on Monday so I guess that's the next project. Spraying PB on those bolts like a wild man...
Seasoned Member
Joined: Dec 2012
Posts: 289
Likes: 0
From: Brooklyn park MD
Year: 2000
Model: Cherokee
Engine: 4.0l
CF Veteran
Joined: Oct 2009
Posts: 2,300
Likes: 0
From: Alaska
Model: Cherokee
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Ok....quick question....
Fixed my heater blend door....still no heat.
At operating temps, the heater hoses do not get warm at all...this tells me heater core is obstructed....so I am going to do a medium pressure garden hose flush....
Question...which one is the heater core inlet/outlet? As in....is the hose with the bypass pipe off of the water pump the heater core inlet?
Thanks all.
Fixed my heater blend door....still no heat.
At operating temps, the heater hoses do not get warm at all...this tells me heater core is obstructed....so I am going to do a medium pressure garden hose flush....
Question...which one is the heater core inlet/outlet? As in....is the hose with the bypass pipe off of the water pump the heater core inlet?
Thanks all.
Fail.
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
