Maryland Cherokee Club
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Mike, Clown, Pudgy, and Tattookid - PM me info on your lift/how long you want your disconnects to be. I plan on ordering the materials today.
Also for anyone else that wants in I need to know ASAP. They should end up being about $60 in materials, but I won't know till I order.
Also for anyone else that wants in I need to know ASAP. They should end up being about $60 in materials, but I won't know till I order.
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Originally Posted by dukie564
center of the bottom bolt to center of the swaybar (hole)? Top is a stud remember.
Senior Member
Joined: Aug 2011
Posts: 994
Likes: 0
From: Bowie, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
I thought I'd fixed my p0456 (small evap leak) for good by replacing the 90 degree rubber elbow coming off the intake. The little f*cker popped up again on the way to work this morning >.<
I'm going to make one of these. Has anyone done this before? It seems like it'd be a much cheaper way than letting a shop smoke test it ($150). I already have an air compressor and a glass jar
I'm going to make one of these. Has anyone done this before? It seems like it'd be a much cheaper way than letting a shop smoke test it ($150). I already have an air compressor and a glass jar
CF Veteran
Joined: Dec 2011
Posts: 1,140
Likes: 0
From: Near the airport by the water
Year: 1999
Model: Cherokee
Engine: 4.0
It looks simple enough to build. Invite me over when you build this machine. Your garage is going to smell like a Hookah shop!
Senior Member
Joined: Aug 2011
Posts: 994
Likes: 0
From: Bowie, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
@Brian I will probably attempt to make this bad boy when I get home, I'll let you know. I don't have any brass fiittings so it depends on whether or not I decided to come up with something.
CF Veteran
Joined: Dec 2011
Posts: 1,140
Likes: 0
From: Near the airport by the water
Year: 1999
Model: Cherokee
Engine: 4.0
I would assume this means a major leak as opposed to a minor one? I'm not 100% sure though. Is your Jeep running any differently? Having weird idle issues?
@Brian I will probably attempt to make this bad boy when I get home, I'll let you know. I don't have any brass fiittings so it depends on whether or not I decided to come up with something.
@Brian I will probably attempt to make this bad boy when I get home, I'll let you know. I don't have any brass fiittings so it depends on whether or not I decided to come up with something.
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Senior Member
Joined: Aug 2011
Posts: 994
Likes: 0
From: Bowie, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Just a basic fitting to slip a balloon onto, and then a 90 degree one for the output hose. although I could probably just ghetto it up by drilling a hole, shoving hose in it, an rtving the crap out of it until there's a decent seal. It doesn't need to be perfect, just good enough to flow air through the system.
CF Veteran
Joined: Dec 2011
Posts: 1,140
Likes: 0
From: Near the airport by the water
Year: 1999
Model: Cherokee
Engine: 4.0
Found it: http://www.jeepforum.com/forum/f11/2...5-code-721270/
Last edited by brian0128; Dec 28, 2011 at 12:03 PM.
CF Veteran
Joined: Sep 2011
Posts: 2,454
Likes: 0
Originally Posted by brian0128
Did you already replace your gas cap? If so, you could do a smoke check. There is a thread that helped me as soon as I find it I'll post up.
Found it: http://www.jeepforum.com/forum/f11/2...5-code-721270/
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
