Maryland Cherokee Club
Senior Member
Joined: Jan 2012
Posts: 599
Likes: 2
From: Baltimore
Year: 96'
Model: Cherokee
Engine: 4.0L
good mornin'
more problems...YEY!...
1. when the jeep is in gear or i release the clutch (while moving ) it makes this sound that sounds like a little baby horn blowing lol. people have been telling me its the throw out bearing? .. sound right?
2. still having a clacking noise while driving .. checked the u-joints..they look good... looking like its the bearing that is in the front slip yoke. (there is alot of "play" in it). checked the fluids to make sure it wasnt running dry... looked good. going to pull the front diff on saturday to check the gears to make sure they are not worn..(apparently having play can cause the gears to wear?..sound right?)
3. driverside axel seal is leaking...... bad lol.
making a junk yard run for a front driveshaft and front sway bar..ordering the sway bar relocation brackets... and after all this is fixed i should be worry free for awhile...hopefully...*crossing finger* lol.
more problems...YEY!...
1. when the jeep is in gear or i release the clutch (while moving ) it makes this sound that sounds like a little baby horn blowing lol. people have been telling me its the throw out bearing? .. sound right?
2. still having a clacking noise while driving .. checked the u-joints..they look good... looking like its the bearing that is in the front slip yoke. (there is alot of "play" in it). checked the fluids to make sure it wasnt running dry... looked good. going to pull the front diff on saturday to check the gears to make sure they are not worn..(apparently having play can cause the gears to wear?..sound right?)
3. driverside axel seal is leaking...... bad lol.
making a junk yard run for a front driveshaft and front sway bar..ordering the sway bar relocation brackets... and after all this is fixed i should be worry free for awhile...hopefully...*crossing finger* lol.
Senior Member
Joined: Jan 2012
Posts: 599
Likes: 2
From: Baltimore
Year: 96'
Model: Cherokee
Engine: 4.0L
the only thing that had some play was the bolt that connects to the trac bar.
Senior Member
Joined: Jan 2012
Posts: 599
Likes: 2
From: Baltimore
Year: 96'
Model: Cherokee
Engine: 4.0L
it was ripped down by a chain, two rednecks under 18 that were drunk, they were white too, and a 2500 cummins with a huge stack. oh and the cop thats our friend's dad stopped by and said hi while they were chaining up. i may live in the ghetto, but i never went to school there.
Cool buddy, I'll text ya. If the NAXJA event is coming in October we can all camp out again and hang out. You down with that Justin? Mike? Tim? Pudgy? Mark? Scott? Russo? And all y'all others? We could have a great time campin and wheelin in October!! I'll bring some food, beer, and cornhole..
my tailpipe broke acouple days ago but we just cut that end off... havnt really inspected it else where but i will do that.
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by mikefrost
After a good day of drunken wheeling LOL
This is how I came to have no muffler...............Def my favorite picture of this jeep
This is how I came to have no muffler...............Def my favorite picture of this jeep
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by XJnewbiegirl
good mornin'
more problems...YEY!...
1. when the jeep is in gear or i release the clutch (while moving ) it makes this sound that sounds like a little baby horn blowing lol. people have been telling me its the throw out bearing? .. sound right?
2. still having a clacking noise while driving .. checked the u-joints..they look good... looking like its the bearing that is in the front slip yoke. (there is alot of "play" in it). checked the fluids to make sure it wasnt running dry... looked good. going to pull the front diff on saturday to check the gears to make sure they are not worn..(apparently having play can cause the gears to wear?..sound right?)
3. driverside axel seal is leaking...... bad lol.
making a junk yard run for a front driveshaft and front sway bar..ordering the sway bar relocation brackets... and after all this is fixed i should be worry free for awhile...hopefully...*crossing finger* lol.
more problems...YEY!...
1. when the jeep is in gear or i release the clutch (while moving ) it makes this sound that sounds like a little baby horn blowing lol. people have been telling me its the throw out bearing? .. sound right?
2. still having a clacking noise while driving .. checked the u-joints..they look good... looking like its the bearing that is in the front slip yoke. (there is alot of "play" in it). checked the fluids to make sure it wasnt running dry... looked good. going to pull the front diff on saturday to check the gears to make sure they are not worn..(apparently having play can cause the gears to wear?..sound right?)
3. driverside axel seal is leaking...... bad lol.
making a junk yard run for a front driveshaft and front sway bar..ordering the sway bar relocation brackets... and after all this is fixed i should be worry free for awhile...hopefully...*crossing finger* lol.
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by XJnewbiegirl
haha my BF knows the kids that did that. apparently its like $30,000 in fines that the driver has to pay back the state.
yes please. lol. iv never been to Rausch creek but my BF has multiple times and im tired of hearing about it..i want to go !
my tailpipe broke acouple days ago but we just cut that end off... havnt really inspected it else where but i will do that.
CF Veteran
Joined: Oct 2009
Posts: 2,300
Likes: 0
From: Alaska
Model: Cherokee
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
Frosty, you get everything together yet and snap pics? and if its all kosher, would you take a deposit to hold the **** for me till I get the rest of the $$ together?
CF Veteran
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by XJnewbiegirl
mine does the same thing... let me know what you find out.
the only thing that had some play was the bolt that connects to the trac bar.
Senior Member
Joined: Jan 2012
Posts: 599
Likes: 2
From: Baltimore
Year: 96'
Model: Cherokee
Engine: 4.0L
how much? crazy rays is like $20 with a $2 core charge.
yeah thats what he was saying. i herd different stories as to how they got caught. the one that is the most popular is that some girl that knew them saw them doing it and she told.
ahhh crud. how can you tell that the steering box is going bad?
ahhh crud. how can you tell that the steering box is going bad?
CF Veteran
Joined: Feb 2012
Posts: 2,716
Likes: 2
From: Bowie, MD
Year: 1999
Model: Cherokee
Engine: 4.0L
Think I could rent your plasma cutter for a day or two while I do this winch bumper? It'd save me hours on cutting LOL
Last edited by mikefrost; Aug 30, 2012 at 10:33 AM.
